Canon Pixma IP1200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

1200. The ink cover is open. Close the ink cover and wait for a while. Do not close the ink tank cover while you are replacing an ink tank.
Download the Canon print app from Google Play Store for Android or the App Store for iOS. Install it and ensure the printer is plugged into the mains and switched on. Check the Wi-Fi signal (a blue light) on the printer, ensuring it flashes quickly with the Online lit. Launch the Canon print app.
If your Canon printer isn`t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the `ink has run out` message and your cartridge should work.
PIXMA: Consumer-level printers for personal and home use, also includes photo printers.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
If your Canon printer isn`t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the `ink has run out` message and your cartridge should work.
Reset the Canon printer
  1. Press `Setup`.
  2. Go to `Device settings` and press `OK`.
  3. Go to `Reset` and press `OK`.
  4. Go to `Reset everything` and press `OK`.
  5. Select `Yes`.
  6. Press `OK`. Your printer has been reset.
20 oct. 2022
Cause. Operation panel is closed or did not open.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :

Canon Pixma IP1200

Canon MP140 – Disable printer, use scanner only?
ANSWER : Dude, God bless ya. I was crazy trying to find a method to use the MP140 as scanner only. Thank you so much!!!!!

Read Full Q/A … :

Canon Pixma IP1200

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Canon Pixma IP1200

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :

Canon Pixma IP1200

Canon Pixma Pro 9000 Mark II ink dried in printer head.
ANSWER : This video shows how to remove the heads. Ignore his methods of cleaning them as they are really stupid. Best way to clean the heads is to run hot tap water into the screens and then flip it over and run the hot water on the heads. Repeat a few times until the water runs clear. Then dry it thoroughly with a paper towel and reinstall.

Read Full Q/A … :

Canon Pixma IP1200

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :

Canon Pixma IP1200

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :

Canon Pixma IP1200

Canon MG6450 printer stopped brinting black colour
ANSWER : Hi there

Read Full Q/A … :

Canon Pixma IP1200