Canon Pixma IP4300
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Windows
- Make sure that the printer is on.
- Open the printer properties dialog box.
- Start Print Head Deep Cleaning. (1) Click the Maintenance tab. (2) Click Deep Cleaning. (3) Select the ink group to be deeply cleaned. …
- Check the condition of the Print Head.
3 mars 2008
The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Use Isopropyl Alcohol (IPA) cleaning solution to clean printer exterior effectively and safely to avoid any printer damage.
Take a cotton towel or rag and dampen it with rubbing alcohol. Blot the ink from the outside inward once again to loosen the ink particles from the fibers in your carpet. If this isn`t breaking up the stain, try using hydrogen peroxide.
In general, use isopropyl alcohol and a lint free cloth or swab — the alcohol evaporates quickly without leaving residue. If the print nozzles are clogged, you might have a more involved cleaning procedure ahead of you.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Automatic print head cleaning
The cleaning function is included in the software of almost every printer. Usually, you can find it under the “printer maintenance” section of your printer`s display menu. Automatic print head cleaning usually takes only one or two minutes, so you won`t need to wait for too long.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Right-click the printer icon on the taskbar, then select Nozzle Check.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.
Read Full Q/A … :
Canon Pixma IP4300
PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.
Read Full Q/A … :
Canon Pixma IP4300
canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334
Read Full Q/A … :
Canon Pixma IP4300
newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…
Read Full Q/A … :
Canon Pixma IP4300
Canon MG6450 printer stopped brinting black colour
ANSWER : Hi there
Read Full Q/A … :
Canon Pixma IP4300
Canon Pixma Pro 9000 Mark II ink dried in printer head.
ANSWER : This video shows how to remove the heads. Ignore his methods of cleaning them as they are really stupid. Best way to clean the heads is to run hot tap water into the screens and then flip it over and run the hot water on the heads. Repeat a few times until the water runs clear. Then dry it thoroughly with a paper towel and reinstall.
Read Full Q/A … :
Canon Pixma IP4300
Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Read Full Q/A … :
Canon Pixma IP4300
Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.
Read Full Q/A … :
Canon Pixma IP4300