Canon FC 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Canon printer error: “Error e02”

Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.

Canon MG2220 – Error Codes

Error E02 – The machine is out of paper or will not feed. Error E03 – Paper jam or output tray is closed.

For example, the error code E, 0, 2 would be displayed. The printer is out of paper. The paper does not feed. Reload the paper in the front tray and press the Black or Color button.
Canon MP240 – Error Codes

E 0 2 = The machine is out of paper, or the paper is not feeding.

I will be glad to help. An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
Solution. Error 2 is a network error code produced by Windows NT that generically translates to: “The system cannot find the file specified.”
Here are a few solutions to fix the Canon memory card error 02: Eject the memory card from the camera after turning it off. Insert it once more after some time has passed. After inserting the memory card, restart the camera.
Canon MG2150 – Error Codes

The led screen on the printer will flash a letter E and will then be followed by two numbers: Error E02 – The machine is out of paper or will not feed. Error E03 – Paper jam or output tray is closed. Error E04 – The Cartridge cannot be recognised.

Canon MG3150 – Error Codes

Error E02 – The machine is out of paper or will not feed.

E > 3 > 2 appears

This screen appears when WPS setup was not completed within a certain time. For details on checking the wireless router settings, see the router manual or contact its manufacturer.

An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded. Remove all paper from the input tray, and then load the correct paper size. Remove any paper from the input tray. Slide the paper width guide as far as possible to the left.
Typically, Net Use Error Code 2 errors are caused by a corrupt or missing Windows-associated file, sometimes due to malware infection.
Refresh DISM Tool. The first method is to refresh the DISM tool. There are times when DISM has pending commands, so it doesn`t take anything new. So, you get the DISM Error 2.
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
E, 0, 8 E08 Ink absorber is almost full. The ink absorber collects excess ink after head cleaning or during printing. Ink usually goes into a bottle which eventually becomes full. There is a risk that ink can begin to spill.
A D023 error is caused by an account that has expired within GroupWise.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
Canon MG3170 – Error Codes

The led screen on the printer will flash a letter E and will then be followed by two numbers: Error E02 – The machine is out of paper or will not feed. Error E03 – Paper jam or output tray is closed. Error E04 – The Cartridge cannot be recognised.

Error E02 – The machine is out of paper or will not feed.
What does E02 error mean? Reason 1: Communication cable fault. The communication cable is how data is sent from the motor to the treadmill screen. The cable is located inside the right upright post of the treadmill base. It can sometimes become trapped or twisted causing the error to show up.
Commonly, it`s noticed that when scanner is not able to go back to its start position, which is the left side of the glass flatbed, your Canon MFP will display E202 error. This happens when either CCD unit of your scanner is faulty or the cable that connects the CCD unit to your all-in-one has some fault.
Two flashes:Printer is out of paper/Paper does not feed

Reload the paper in the Rear Tray, Cassette, or Manual Feed Slot of the Front Tray and press the RESUME/CANCEL button. When printing on the plain paper, load into the Cassette or Manual Feed Slot of the Front Tray.

The machine is unable to drain the water away

Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Read Full Q/A … :

Canon FC 2

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon FC 2

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon FC 2

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon FC 2

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

Canon FC 2

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon FC 2

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon FC 2

Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.

Read Full Q/A … :

Canon FC 2