Canon FC 1

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

E, 1, 6. Ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the machine`s Stop (Reset) button for at least 5 seconds with the ink cartridge installed.
According to Canon, Error 06 indicates a fault of the sensor cleaning module.
First of all locate the STOP/RESET/RESUME button on your printer which is represented by a triangle within a circle on the body of your printer and is usually in red, white or black as pictured below. With the reset button located hold it down for at least five seconds and then release it.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Err 06. Your camera is capable of cleaning its own sensor and dislodging dust from it. If you see this Canon error code, it`s down to the camera being unable to complete its cleaning. To remedy, turn the camera on and off again.
To clear the error manually push the UP, DOWN and PUMP buttons simultaneously, ensure the display clears before showing the temperature or error code again. If the display does not clear the reset was not executed correctly.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
What do you mean by E16 service is currently scrambled? Seeing this error on your screen means the DStv or GOtv satellite has temporarily suspended transmission to your decoder. Therefore, you need to clear the GOtv E16 error code to access channels in your bouquet.
E16: The ink has RUN OUT.

Replace the empty ink cartridge.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed. SUBSCRIBE RSS FEEDS.
The upper thread could be tangled. Remove the upper thread and any loose threads. Raise the pressure foot, raise the needle to its highest position and rethread the machine. Remove the bobbin and bobbin case to clean any lint or loose threads.
In Event Viewer dashboard, click Applications and Services Logs –> Microsoft –> Windows –> Print Service –> Operational. Right click Operational, select properties. Check the Enable logging box. Click Apply and Ok.
The Error Message and Indicators

In either case, you`ll need to have it repaired by Canon. The cost for repair varies depending on the camera, but is typically between $200 and $300.

If the thermal cutout has operated the circuit will sense a lack of power and the controller will fault (Error 6). The controller will not attempt to recover from this condition, it will need to have the power turned off and back on again to clear the fault once the thermal cutout has cooled below 38°C.
That means that either the game or your computer is broken since DirectX was given bad input arguments.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
The Maintenance tab allows you to perform printer maintenance or change the settings of the printer. Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles.
Err 01: The communication between the camera and lens is faulty.
16-4 errors can be caused by the AirTV losing power, or losing its connection to the internet. Check that the AirTV device is plugged in and powered on – the indicator light on the front of the device should be green. A direct connection to a power outlet is preferred over a power strip.
The E 5 error is an indication that your PIXMA MP160 does not recognize that one or both cartridges installed. The PIXMA MP160 requires that both the black and the color ink cartridges are both installed in the printer. If one is missing, the E 5 error will appear.
E16 The Smartcard is not enabled for this channel. It may be that your account has been suspended. Please contact the MultiChoice Call Centre for assistance. E19 Your account has been suspended.
This “error code 16 this request was blocked by the security rules” Error message usually occurs when the ISP Blocks the site. Sometimes, Antivirus tools and firewalls block the website, leading to the error code.
On your Mobile Phone, kindly send “RESET IUC to 4688” as SMS. Wait for a few minutes while your Decoder still remains On, you will regain signal after a few minute of sending the SMS.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

Canon FC 1

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Read Full Q/A … :

Canon FC 1

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon FC 1

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon FC 1

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon FC 1

Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.

Read Full Q/A … :

Canon FC 1

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon FC 1

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon FC 1