Canon Bubblejet (BJ) 5
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Error code E05
This error code may cause an orange light on your machine to blink 5 times and is caused by the print head not being installed at all or it may have been installed incorrectly.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.
The machine is not connected properly
Make sure that the USB cable is securely plugged into the USB port of the machine and is connected to the computer. If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to the computer, and try printing again.
#852. The error has occurred by shutting down the power switch while processing jobs. Recheck the setting and redo the operation.
This error can sometimes occur even when you`re not trying to print, or if you don`t have a printer installed. To overcome this issue, the first thing to check is to make sure you have the latest printer driver installed for your printer.
The main cause of the issue is the absence of the printer driver software. Driver software that are incompatible with the system and also software that lack updates are other reasons that cause the printer error 5 to occur. Also, driver software for a particular device should be configured after its installation.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Common factors include driver problems, software issues, hardware failures and overuse.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
If you are having trouble getting your cartridge to read properly or are having connectivity issues with your printer, sometimes a hard reset will resolve the problem. Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
#853. A document could not be printed because its data size exceeded the machine`s upper processing capability. The machine may not be able to print documents with many pages. Reduce the number of pages per printing, or print when no print job is queued or no document is being printed.
Cause: This is usually caused by SQL Server not being installed correctly or is not running.
However, there may be times when your Canon printer is not working optimally for whatever reason. At such times, you should try doing a Canon printer reset. This can resolve technical issues such as your printer being slow, printing blank pages, or being unresponsive.
Usually, the error “5:Access denied” indicates that the program doesn`t have permission to access the folder, right-clicking on VS Code shortcut and selecting the option “Run as Administrator” should fix the problem.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
They may contain some bug fixes, which makes your device work better, safer, and more efficiently. Every well-known printer manufacturer releases firmware updates several times a year. Yet, it`s only up to you whether to install them or not.
Here`s how to perform a hard reset: Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing. Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times. Step 3: This should have restored your device to its original factory setup.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Try moving the router and printer closer together.
Switching to a wired connection, then back to wireless, can sometimes work as well. Persistent print problems might be a sign that it`s time for a new machine.
a misprint or misspelling in a text.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html
Read Full Q/A … :
Canon Bubblejet (BJ) 5
replacing waste ink absorber on Canon Pixma ip6000
ANSWER : ditto, ditto & ditto
Read Full Q/A … :
Canon Bubblejet (BJ) 5
Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.
Read Full Q/A … :
Canon Bubblejet (BJ) 5
Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))
Read Full Q/A … :
Canon Bubblejet (BJ) 5
Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.
Read Full Q/A … :
Canon Bubblejet (BJ) 5
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
Canon Bubblejet (BJ) 5
CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html
Read Full Q/A … :
Canon Bubblejet (BJ) 5
Canon PIXMA MP190 – paper pulls to one side and ja
ANSWER : My Canon MP470 pulled paper to one side. Thanks for the simple solution. It worked and made doing my taxes a little less of a pain.
Read Full Q/A … :
Canon Bubblejet (BJ) 5