Canon Personal Copiers (PC) 8

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the printer says the cartridge is damaged or will still not recognise the cartridge then remove the cartridge and gently wipe the copper area or the cartridge with a dry soft cloth (the area known as the `chip`) to remove any static that may have accumulated on it and re-insert to see if it will solve the problem.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.
Most ink cartridges only require a single press of the button to reset it, but if it doesn`t reset, try holding the reset button for a few seconds.
Your printer may not recognize the new ink cartridge, or the ink counter may read it as empty. Many printers have a cartridge reset feature that forces the machine to recognize the cartridge as new.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
If this type of chip is in your toner, you will need to replace the chip when refilling your cartridge. Other chips can be reset with a “resetter,” a small plastic tool that physically connects with the cartridge chip and tells the chip to return its count of spent droplets to zero.
What to Look For. Chances are you suspect a faulty ink cartridge due to your print quality declining. Streaks, smears and stripes on your printout are all signs of a bad cartridge, as is a lack of a particular color or a color appearing very faint. Sometimes the printer refuses to print if a cartridge is faulty.
Error messages like this also indicate insufficient memory on your hard drive. You should know that your system needs enough free space on your hard drive to ensure the efficiency of your computer. Anyway, error code 8 is a fairly common error that one could get after frequent use.
If you put too many clothes in the drum and overload the machine it may result in error code E08 being displayed. Should this occur then reduce the load size by removing some of the garments in the drum and try again.
Check the corona wire for any dirt or powder and clean.

The new toner cartridge not working may not be a cartridge problem but an issue with the corona wire. Check the corona wire for any powder or dirt and gently wipe clean using a lint-free cloth.

This error is caused by the chip on the cartridge still reporting the level from its previous use. Some cartridge chips cannot be reset which means when installed it will still show as empty or low ink. Replacing the cartridge is not necessary.
Printer Settings Menu

Press (Settings/Registration). Press [Function Settings] → [Printer] → [Printer Settings].

The Maintenance tab allows you to perform printer maintenance or change the settings of the printer. Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles.
If ink is not coming out when you perform printing for the first time, it is possible that ink is not flowing into the printer properly. Make sure each ink tank is filled with ink to its upper limit and perform ink flush. If the problem is not resolved yet, the print head may be damaged.
Can Canon ink cartridges be refilled? Yes, black and tri-color Canon cartridges can be refilled with a refill kit. The process can be messy (it requires inserting a syringe full of ink into the ink chamber) but can save a lot of money in the long term.
A maintenance cartridge is used to store excess ink expelled from the printer, and works like the ink absorber on other models. When this becomes full, the maintenance cartridge is user replaceable as opposed to the ink absorber.
You can also tell which cartridge is empty by checking the speed at which the error light flashes when the print head moves to the ink cartridge replacement position.
Error message E8 indicates a communication issue between electronics. 2. Contact an Authorized Service Center. If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
8F means either a paper tore inside while it was printing and jammed, or some other mechanical malfunction has occurred. Open your printer, take out the toner, and the back panel if there is one. Look inside to see if you see anything jammed or stuck.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Error 0x8 means “Not enough memory resources are available to process this command.” vague as well.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How to reset ink cartridge Canon Pixma MG6320
ANSWER : Your post is a bit confusing. You don’t reset the chip, you pull off the old one and replace it with the one they gave you.

Canon PIXMA ip4000 Cartridges
ANSWER : It had been exactly the same subject, couldn’t discover an appropriate broker and method for earnings ultimately had to rummage through the Web, and there I ran across this website you will find there is a remedy to your trouble, many thanks for the fascination!))

replacing waste ink absorber on Canon Pixma ip6000
ANSWER : ditto, ditto & ditto

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try.