Canon Pixma IP4200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
Ever wonder why your prints sometimes appear faded or streaky? It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Usually associated with compatible or re-filled cartridges, a leaky cartridge deposits toner inside your printer and onto your paper in places that it`s not intended, resulting in black spots.
Algae commonly cause streaking and staining on roofs. The dark color that appears as a black stain is caused by a specific type of algae called gloeocapsa magma. This growth is a type of bacteria that forms when algae spores group together.
The reality is that Black Streaks occur primarily as a result of moisture. So if you are in a moist environment you are more likely to have Black Streaks than those folks living in a dry climate. Now this does not mean actual precipitation. Moisture is in the air and collects as dew in the evenings.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Streaks on your print jobs are a result of your copier glass being dirty. “Dirt” is created by fingerprints, dust, and other forms collected through usage. Often this will be detected by your device before streaks begin to appear, and a display will read that the glass needs to be cleaned.
Printer`s marks are special marks that are added to your PDF files and to the edge of your parent sheets to assist the offset printing press in proper alignment, trimming, and color values. These printer`s marks are trimmed off once printing is complete. Center Marks. Trim Line. Bleed.
Graphite is a black mineral with a black streak. You probably see it every day – it is used to make the `lead` in your pencil. Other minerals, like galena and pyrolusite are also black or grey with black streaks.
Black stain is characterized as a dark line or an incomplete coalescence of dark dots localized on the cervical third of the tooth. Over the last century, the etiology of black stain has been the subject of much debate. Most of the studies concerning this issue were conducted in pediatric population.
streak, the colour of a mineral in its powdered form. It is usually obtained by rubbing the mineral on a hard, white surface, such as a tile of unglazed porcelain, so as to yield a line, or streak, of fine powder.
If you`re going to wash off black algae, avoid using a power washer, which can damage your roof shingles. Instead, create a mix of half water, half bleach, and apply it gently to the stained roof areas. (Wear gloves and avoid inhaling the fumes.)
A possible cause may be that appropriate paper is not used or the amount remaining in toner cartridges is running low.
A printing defect characterized by elongated blotches of ink in non-image areas, commonly caused by mechanical problems with the press, such as damaged rollers (in lithography), or by improper wiping of a gravure cylinder by the doctor blade (due to dried ink fragments attached to it, or other such problems).
These types of lines are typically caused by dirt or white out (correction fluid) on the scanner unit, or one of the corona wires for printing is dirty. This problem is usually resolved by cleaning the scanner glass, scanner glass strip and white plastic bar with a soft lint-free cloth, or cleaning the corona wires.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
This symptom occurs if a margin is set to none in the printer driver. A margin of 1/4″ (5 mm) or less around the edge of paper or 3/8″ (10 mm) or less around the edge of envelopes is not printable with the machine. Make sure to have margins around the document to print.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Pixma IP4200

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon Pixma IP4200

Canon PIXMA MP190 – paper pulls to one side and ja
ANSWER : My Canon MP470 pulled paper to one side. Thanks for the simple solution. It worked and made doing my taxes a little less of a pain.

Read Full Q/A … :

Canon Pixma IP4200

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon Pixma IP4200

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon Pixma IP4200

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Read Full Q/A … :

Canon Pixma IP4200

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Pixma IP4200

Canon pixma – ink absorber almost full
ANSWER : They are on the bottom of the printer. If you want to clean them, you can take them out and wash them in hot tap water. Wring them out like a sponge. You will need to reset the printer. http://jezpinions.blogspot.com/2012/03/canon-mg6150-ink-absorber-reset-error.html

Read Full Q/A … :

Canon Pixma IP4200