Canon Bubblejet (BJ) 5

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Dirty or misaligned print heads

Your printer may be printing fuzzy, blurry, or other faint text because of dirty print heads. All modern printers have a self-cleaning mode, which cleans the print heads, and additional internal equipment used in the printing process.

Ever wonder why your prints sometimes appear faded or streaky? It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings. Below we will describe each of these causes for horizontal banding as well as ways to try and fix them.
Go to the printer panel, click on Maintenance, then Paper Feed Adjust, then Adjust Print Quality, then select AUTO . Run another print after the pattern prints and scans. If the banding does not disappear you may have to go back through these steps and instead of AUTO, run the Manual Adjustment.
Go to the printer panel, click on Maintenance, then Paper Feed Adjust, then Adjust Print Quality, then select AUTO . Run another print after the pattern prints and scans. If the banding does not disappear you may have to go back through these steps and instead of AUTO, run the Manual Adjustment.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HelpMe: Canon pixma ip 4300 won't turn on
ANSWER : A few years after last comment. Same problem. Nothing seems to work. Does anyone have a foolproof answer?

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Removing the print head on a Pixma MX 475?
ANSWER : Take out the ink tanks. On the right side there is a plastic release lever. Lift it up and the heads will unlock. Reach in and remove the heads. Take it to the sink and run hot water through the screens on top and then flip it over and run hot water over the heads. Repeat a few times until the water is clear. Reinstall and try again. It might take a couple pages for the print to look good.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon PIXMA MP190 – paper pulls to one side and ja
ANSWER : My Canon MP470 pulled paper to one side. Thanks for the simple solution. It worked and made doing my taxes a little less of a pain.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon Bubblejet (BJ) 5