Canon Pixma MX700

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Restart your computer – this often will recover any lost connections with wireless devices. Power off and on the printer, and even the access point or wireless router your printer connects to. Check your printer configuration – you may not be assigned to the correct port for the printer.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings. In the Reset settings menu, select the desired area you want to set back to the factory defaults.
It has an ethernet port on the back, above the USB port. Connect an ethernet cable into this port, then connect the other end of the ethernet cable to your router. Once the printer is connected to the router, it will (in most instances) automatically obtain an IP address.
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
The Maintenance tab allows you to perform printer maintenance or change the settings of the printer. Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Canon PIXMA MX700 Specification:

O.S: Windows xp, vista, 7 and 8, 8.1, Windows 10 32 bit / 64 bit.

Checking Firmware in the Device List. Select the [Devices] menu > [Device List]. Click [Device Name] for the printer you want to check the firmware of.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Printer cartridges can be replaced on an as needed basis! If one cartridge is running low, you do not have to replace the other colors at the same time. However, you do need to have all of the printer cartridges installed in the printer for it to work.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Change the color settings according to the following procedure. (1) Display the [Quality] sheet. (2) Select [Manual Color Settings] or [Manual Grayscale Settings] → click [Color Settings]/[Grayscale Settings]. (3) In the [Color Adjustment]/[Grayscale Adjustment] sheet, adjust the brightness with the slide bar.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon pixma MX700
ANSWER : I have the Canon MX700 printer. The black said ’empty’ but looked 1/2 full and we hadn’t printed in 2 months, so i figured it was dry. I soaked the sponge part of the black cartridge in hot water for 10 minutes and rinsed in hot. Dried with tissue paper and put it in. The printer gave the same message. I held the Stop/Reset button for about 3 seconds—that cleared the thing and it printed. The i printed some lines of various colors to keep things fluid. Voila` . Fini.

Read Full Q/A … :

Canon Pixma MX700

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon Pixma MX700

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon Pixma MX700

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon Pixma MX700

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Pixma MX700

Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.

Read Full Q/A … :

Canon Pixma MX700

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Pixma MX700

canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon Pixma MX700