Canon Color Bubblejet (BJC) 80

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you accidentally insert your inkjet`s cartridges in the wrong color slots, most printers sense the error through circuits that check installed consumables and alert you with an on-screen message. Until you correct this type of installation mixup, your printer simply won`t operate.
Ensure your Printer Driver is Up to Date. A printer driver that is not updated and faulty can result in many issues, such as color printing issues. If you are facing color printing issues on your Canon printer, try to update it to the newest version. Find the official printer driver from the website and download it.
If your Canon printer isn`t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the `ink has run out` message and your cartridge should work.
You`ll damage your printer

However, if you force a cartridge in place, you could damage both the cartridge and the printer. In addition, if you unwittingly switch the ink cartridges around in a printer, you could also damage your printer, or find that all your printouts will be stained.

Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
If the print positions slightly shift for the respective colors, use the following procedure to perform color print mismatch correction. Press (Settings/Registration) <Adjustment/Maintenance> <Adjust Image Quality> <Auto Correct Color Mismatch>.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Press down on the cartridge gently for several seconds. The LED light on the chip resetter will flash several times, indicating that contact has been made with the chip. Continue holding the cartridge in place until the LED light emits a steady light.
Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.
This is because of the chips on the ink cartridge, each chip is programmed to allow inks to only work with certain printers. Therefore, you are unable to use a different number ink in your printer which is not compatible with your printer.
The shelf life for an original printer cartridge is 24 months and the shelf life for a compatible cartridge is 36 months. Over time, ink dries out and settles inside the cartridge, which can cause your printer to clog.
It is due to the chips on the ink cartridges, every single chip is programmed for allowing the inks to just work with particular printers. Thus, you will not be able to use any different number of ink in your printer, that will not be compatible with your printer.
As long as your printer also has a colour cartridge, all the colours from the colour cartridge will print together to make … BLACK.
Putting a cartridge into the wrong color slot could cause damage to your printer and void your warranty.
No, you cannot put in 2 black cartridges. You can however, remove the color cartridge to just print in black.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html