Canon Pixma MP610
Experienced technical support provide their insights in answering this question :
I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Check the ink levels
Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
If you want to print using only the black ink or the color ink cartridge, follow the steps below. Open the printer driver setup window. Click Print Options… on the Page Setup tab. Select the ink cartridge(s) to be used for printing and click OK.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Most ink cartridges only require a single press of the button to reset it, but if it doesn`t reset, try holding the reset button for a few seconds.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
Printing with an empty cartridge will soon cause printhead nozzles to overheat and fry remaining ink solid.” So, if you must continue to print, use the “Printing Preferences” dialog, on the “PAGE SETUP” tab, with the “PRINT OPTIONS…”, “Print With:” option: “All Colors (Default)”, “All except PGBK (Black)”, or “Only …
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
However, there may be times when your Canon printer is not working optimally for whatever reason. At such times, you should try doing a Canon printer reset. This can resolve technical issues such as your printer being slow, printing blank pages, or being unresponsive.
Press Setup. Press the arrow buttons until you navigate to Device settings and then press OK. Press the arrow buttons until you navigate to Reset setting and then press OK. Press the arrow buttons until you navigate to Reset all and then press OK.
Select Setup on the HOME screen. Select Device settings, then touch the OK button. The Device settings screen is displayed. button to select Reset settings , then touch the OK button.
Hold the on/off button and press the stop button 5 times. Release the on/off button. The printer resets itself and restarts automatically afterwards.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
The contacts in your printer or cartridge are damaged or dirty. The printer`s memory is not reset. It`s still reading the data from the previous chip. The printer has not been used for long, causing the cartridges and their metal contacts to dry.
Unplug and restart your printer
Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
Cleaning the print head will start the ink cartridge replacement process. If you do not intend to replace an ink cartridge, press the ink button again to return the print head to its home position. The printer starts cleaning the print head and the power light and the ink lights begin flashing.
Dried Ink Buildup on the Printhead
If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.
A print head scratch occurs when an accumulation of dust or debris gets stuck in your machine. And if this happens, the damage cannot be fixed. In most cases, you would need to purchase a new printhead. That`s why it`s important to keep the dust out, away from your machine.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon MP610 stopped printing black
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.
Read Full Q/A … :
Canon Pixma MP610
Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.
Read Full Q/A … :
Canon Pixma MP610
canon mp610 doesn't print black
ANSWER : Hello – I have an MP610 which has worked well for a number of years.
Read Full Q/A … :
Canon Pixma MP610
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Canon Pixma MP610
Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?
Read Full Q/A … :
Canon Pixma MP610
Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.
Read Full Q/A … :
Canon Pixma MP610
Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.
Read Full Q/A … :
Canon Pixma MP610
Can't print in black
ANSWER : The only way to really clean the head is to remove it and flush it under hot running water. Take the ink tanks out and there is a release lever on the right. Lift it and reach in to remove the head assembly.
Read Full Q/A … :
Canon Pixma MP610