Canon Personal Copiers (PC) 6
Experienced technical support provide their insights in answering this question :
hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The easiest way to connect the Canon printer to the computer is via a USB cable. It`s the traditional method of connecting devices. One end of the USB remains connected to the printer, and the other must be connected to the computer`s USB port.
Restart your computer – this often will recover any lost connections with wireless devices. Power off and on the printer, and even the access point or wireless router your printer connects to. Check your printer configuration – you may not be assigned to the correct port for the printer.
Your printer should have been packaged with a USB cable regardless of whether it is a wireless or wired printer. Plug the cable into your printer and your computer`s USB port. The direct linking should trigger your computer to recognize the printer and start up the software needed to complete the installation.
The printer supports 3 connection methods. USB, Ethernet or Wireless. None of them depend on or require a internet connection to function. Without internet, you will not be able to use any cloud based features like scan to email, but printing and scanning to / from devices on a local network is possible.
Setup the Wireless Connection Using WPS
If you have a Wireless access point or router that supports WPS, you can easily connect your Canon wireless printer to your home network. (A). Tap Wi-Fi.
It could be due to a loose USB or network cable connection, outdated printer drivers, issues with the printer spooler service, or even wireless connectivity problems.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.
Check1 Make sure that the printer is turned on. Check2 Make sure that the Wi-Fi lamp is lit on the front side of the printer. If the Wi-Fi lamp is off, Wireless LAN is inactive. To activate Wireless LAN, press and hold the RESUME/CANCEL button, then release the button when the POWER lamp flashes white 10 times.
Change your USB Cable or the USB Port
Alternatively, you can also use a USB cable recommended by Canon. If it`s not the cable, then check your USB port. If your camera doesn`t connect to your PC, then try plugging it again into a different USB terminal. Most PCs and laptops feature multiple USB ports.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.
Read Full Q/A … :
Canon Personal Copiers (PC) 6
MP600 – PGBK problem
ANSWER : Pop the head out and flush it under hot running water. Just take out all the inks and there is a release lever on the right side, then reach in and remove the heads.
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Personal Copiers (PC) 6
Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Read Full Q/A … :
Canon Personal Copiers (PC) 6