Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the alarm light lights and stays lit after you you turn on your printer, and doesn`t respond to any commands on the printer panel, try the following: Check to make sure there are no paper jams or other obstructions. Unplug the printer for approximately two minutes, then plug it back in.
If the Status light remains yellow for several minutes before printing the first page of a document or if the Status light flashes green for several minutes while the printer warms up, then the Drum Condensation Countermeasure Mode has been enabled.
Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.
The alarm and event printer service allows alarms and events to be printed out on a printer that is connected to a server or client PC via a serial port.
A yellow triangle next to a device means Windows has identified a problem of some kind with that device. The yellow exclamation mark provides an indication of a device`s current status and could mean there`s a system resource conflict, a driver issue, or, frankly, almost any number of other things.
Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver.
Printer detected ink out condition (The lamp on the ink tank flashes). Stop printing, replace the ink tank, and then print again. Be sure to replace the empty ink tank before resuming printing.
Lights or flashes orange when an error occurs, such as paper-out or ink-out. When performing machine maintenance or machine settings, options can be selected according to the number of flashes. Light or flash orange when ink runs out, etc.
This condition occurs when paper is jammed inside the printer. To resolve the error, find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Meaning: the paper exit tray is closed / Paper jam. Solution: the paper is jammed. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.
A ghost printer is a deleted printer that keeps appearing and reappearing even though you`ve tried to delete it and then done a server reboot.
Your alarm system`s keypad can be thought of as your command center, a headquarters for everything in your alarm system. The purpose of a keypad in an alarm system is to act as the central panel for your entire security system. You use the keypad to arm and disarm your alarm system.
You have two options to factory reset Canon printers. One method is to use the Reset button, while the other is to utilize the Setup option.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred. Indicator light color.
A Machine Identification Code (MIC), also known as printer steganography, yellow dots, tracking dots or secret dots, is a digital watermark which certain color laser printers and copiers leave on every printed page, allowing identification of the device which was used to print a document and giving clues to the …
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

– Alarm lamp flashes orange: An error has occurred and the machine is not ready to print. – ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred. Lights or flashes orange when an error occurs, such as paper-out or ink-out.
Light flashes repeatedly orange. Machine is out of paper. Reload the paper in the rear tray. Press the Black or Color button to restart the print job.
Alarm LED Flashes Orange

Count the flashes and take the appropriate action to correct the error. Ten flashes – Cannot perform duplex printing. The size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A4, Letter, A5, and B5.

Thirteen flashes: The ink level cannot be detected. Possible Solution: Replace the ink tank and close the top cover.
This vibrant hue symbolizes adventure, ambition, creativity, and sociability. Orange is often associated with positivity.
The hex code for orange is #FFA500.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon i850 light flashing orange
ANSWER : I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck

Read Full Q/A … :
Unknown Printer

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :
Unknown Printer

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :
Unknown Printer

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :
Unknown Printer

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :
Unknown Printer

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :
Unknown Printer

Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.

Read Full Q/A … :
Unknown Printer