Canon Color Bubblejet (BJC) 7000
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Simply turn the printer off with the power button on the printer. Once turned off, disconnect the printer`s power cord from the back of the printer. Wait approximately 30 seconds before you reconnect it. Once reconnected, use the printer`s power button to turn the printer back on.
If the nozzle check pattern shows adequate ink, but the printer doesn`t print color, clean the printhead. After that, print a nozzle check pattern. After performing printhead cleaning, perform a printhead deep cleaning. If still, the problem persists, switch off your printer and do the deep cleaning after a day.
Ensure your Printer Driver is Up to Date. A printer driver that is not updated and faulty can result in many issues, such as color printing issues. If you are facing color printing issues on your Canon printer, try to update it to the newest version. Find the official printer driver from the website and download it.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
If your Canon printer isn`t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the `ink has run out` message and your cartridge should work.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon Printer does not print blue ink
I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.
Canon MP530 won't print black
I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.
Canon Pixma MX882 won't print black text
Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.
Print problem with Canon MP620
Open the front of the printer.
Canon MP600 uses color ink to print black and white…
Have you tried setting the print out to grayscale only (black and white)?
Canon i560 Will not print black
Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Canon MP560 PGBK not printing top grid
Hello, I have the same problem a number of people on this forum have raised in my Canon IP4500 – the PGBK ink is not printing at all, despite several deep cleansing cycles, soaking the print head overnight a few times. If you could advise any potential fix, that would be great. My email is [email protected]
Canon Pixma MP610 won't print in black
Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.