Canon FC 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the nozzle check pattern does not print out properly, check if any of the missing colors are due to those color ink tanks being empty. If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly.
Ink or toner: If the printer`s red ink or toner cartridge is low or empty, it may not be able to print red. Check the ink levels and replace the cartridge if necessary. Blocked nozzle: Sometimes, the nozzle that dispenses red ink may become clogged with dried ink or debris, preventing it from printing properly.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
When the printer doesn`t print black ink, the most likely reason is the print head nozzles, which, when clogged, prevent it from releasing black ink onto the paper. It may also stop printing black if the black ink has run out or if the black ink cartridge is clogged.
There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
A series of Canon printers allows users to continue printing on a single button press. User can hold down Stop/Reset/Resume for five seconds and then release it. By doing so, you can continue printing regardless of the low or empty cartridge estimate.
Kindly go to Start > Settings > Update and Security > Troubleshoot > Printer > select Run Troubleshooter. You may also check the print settings to ensure that the option for black and white/grayscale is not selected.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If you print in mostly black, your black cartridge will naturally run out faster than the color cartridges. However, some printers will pull a bit of ink from the color cartridges when you are printing solely in black, just to keep them primed for future use.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
After a lot of use, your inkjet printer`s printhead nozzles may become blocked with dried ink. The first thing you can do is initiate a cleaning cycle and add drops of 91% isopropyl alcohol if needed. If the steps above does not work, you may need to manually clean the printhead out of the printer.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
When the printer doesn`t print black ink, the most likely reason is the print head nozzles, which, when clogged, prevent it from releasing black ink onto the paper. It may also stop printing black if the black ink has run out or if the black ink cartridge is clogged.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon FC 2

Waste tank counter reset code for Canon printers.
ANSWER : I have a Canon Pixma MG4150 and I never see any references to it on help pages. I too want to get rid of the ink absorber warning after havig cleaned and reinstalled the absorber pads. Can anyone help?

Read Full Q/A … :

Canon FC 2

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon FC 2

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon FC 2

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon FC 2

Canon PIXMA MP 210
ANSWER : Mine was grabbing the paper from the right side only (where the roller is), sucking the paper in partway and then going sideways and jamming. I cleaned off the roller to no avail. Then I picked the printer up and looked in the paper slot and found a small screwdriver lying sideways so deep you almost couldn’t see it. I got that out and now it works fine!

Read Full Q/A … :

Canon FC 2

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon FC 2

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon FC 2