Canon FC 2

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If something is in front of the paper feed tray, the paper feed tray may not open even after you command a print job. As a result, the 6000 error shall occur. In such a case, remove any physical objects that prevent the tray from opening and turn OFF the printer. Then, turn ON the printer and command printing again.
Solution. There are several reasons for Error 6000 to appear, including a paper jam, an improperly seated ink tank, and more. Paper is jammed or there is an object inside the printer. The printer needs to be reset.
If you command printing when the tray cannot open, the 6000 error occurs. In such a case, remove any physical objects that prevent the tray from opening and turn OFF the printer. Then, turn ON the printer and command printing again. [ The tray cannot open due to the obstructions. ]
E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
Support Code 6900 means that there is a problem with the wireless network adapter in the printer and that service maybe required.
This specific error message occurs when hosting is turned on or the . ND file isn`t functioning properly.
QuickBooks Error 6000 832: Overview

To overcome this pestering issue, you are advised to immediately Update the QuickBooks followed by a modified file name. Along with this, you are suggested to look for the hosting on all systems and confirm the same.

What to Do. Turn off printer and unplug it. Plug in the printer again and turn it back on. If this does not solve the problem, service is required.
Description. Support Code 6004 generally means that there may be foreign material (such as scraps of paper) inside the printer. However, if no such material is found, your printer will require service.
(1) Load a sheet of A4 or Letter-sized plain paper in the Rear Tray and set the Paper Thickness Lever to the right. (2) Print the nozzle check pattern to check the print head condition. (3) If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours.
This means that something`s gone wrong in Online Banking.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
Description. Support Code 6004 generally means that there may be foreign material (such as scraps of paper) inside the printer. However, if no such material is found, your printer will require service.
To remove printer and driver on Windows 10, open Settings > Printers & scanners, select the printer, and click “Remove device.” Then open Print management > Custom Filters > All Drivers, right-click the driver, and select “Delete.”
E, 1, 6. Ink has run out. Replace the ink cartridge and close the Scanning Unit (Cover). If printing is in progress and you want to continue printing, press the machine`s Stop (Reset) button for at least 5 seconds with the ink cartridge installed.
An E5 or E6 error occurs when the scanner or printer is in an error state. Reset the printer. With the printer on, disconnect the power cord from the printer. Unplug the power cord from the power source.
E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

ERROR On New Canon iR Advance C2030
ANSWER : Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.

Read Full Q/A … :

Canon FC 2

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon FC 2

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon FC 2

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

Canon FC 2

Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.

Read Full Q/A … :

Canon FC 2

Canon BJC-70 error message F 12
ANSWER : I am having the same problem, not only with my BJC-70, but also the equivalent problem with my BJC-80. Typically I am working at my computer, and the printer is powered up, but idle. All of a sudden for no apparent reason, it emits a series of beeps and returns the print head to the central position. The BJC-70 display Error F12. With the BJC80 you have to count the beeps. The problem seems to be caused by some sort of premature failure of the print head, due to an electronic fault. Sometimes, if the printer is powered down for a few minutes or longer, it will work normally for a short time after power is re-applied, but typically the problem recurs within 30 minutes, and this period of trouble free operation gradually reduces, until the print head will not work at all. The only solution is to replace the offending print head. You should, however, retain the failed head, in order to salvage any un-used ink remaining in the tanks. The new print head comes with full ink tanks. As soon as one of these fails, I replace it with an ink tank retrieved from the failed head. I don’t discard the failed head until both ink tanks have been retrieved.

Read Full Q/A … :

Canon FC 2

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon FC 2

canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon FC 2