Canon Pixma IP4300

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ink or toner: If the printer`s red ink or toner cartridge is low or empty, it may not be able to print red. Check the ink levels and replace the cartridge if necessary. Blocked nozzle: Sometimes, the nozzle that dispenses red ink may become clogged with dried ink or debris, preventing it from printing properly.
If the nozzle check pattern shows adequate ink, but the printer doesn`t print color, clean the printhead. After that, print a nozzle check pattern. After performing printhead cleaning, perform a printhead deep cleaning. If still, the problem persists, switch off your printer and do the deep cleaning after a day.
Click Settings, and then click Printers and Scanners. From the list of printers available, select the Canon printer. Press the Properties tab and check whether you have enabled color printing on your Canon printer. If color printing is not enabled, you should proceed to enable it.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
Why is your printer printing pink? Your printer may be printing pink as the other ink cartridges have run out. Common printer-to-page technology processes colour in four parts; cyan, magenta, yellow and black (CMYK), or toner. The ink cartridges in your inkjet or colour laser printer are split up into four colours.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
The most common reason a refilled ink cartridge does not work is that you didn`t reinstall the cartridge properly. Check the cartridge and make sure it is not dislodged or misaligned. If there is no visible sign of misinstallation, remove the cartridge and reinstall it.
To make red, magenta and yellow inks are used, since magenta absorbs green light and yellow absorbs blue light, resulting in only red light being reflected back to our eyes. If you`ve ever used different colors of paint on a palette, you probably understand the basic mechanism of color printing.
Prints that appear more green are commonly caused by an absence of magenta ink/toner being put to paper by your printer. In addition to your prints looking “greener” you may also notice yellow and blue areas appear almost neon due to the the magenta not being able to give them more realistic tones.
In short, the color management workflow is interrupted and forces a double color management situation. The result is usually prints with a strong magenta cast. The problem usually resolves after a subsequent minor update.
A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
Select Canon Color Matching. From the pop-up menu, select Color Options. Then for Color Mode, select the mode that matches your purpose from among Photo Color, Linear Tone, PRO Mode, and Vivid Photo.
Monitors use RGB whereas printers use CMYK. This means that RGB colour mode is best for digital designs, while CMYK is best for print materials. You can switch your colour guide to CMYK, but it still won`t be an exact representation of your printed product as the colours can depend on the printer.
You have two options to factory reset Canon printers. One method is to use the Reset button, while the other is to utilize the Setup option.
After all, colors will pop more against a rich black than they will against gray. When you order full color print, we recommend using 80% cyan, 80% magenta, 80% yellow, and 95% black to ensure that your black appears as dark and rich as possible.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
After refilling ink tanks, close the bottle cap of the ink bottle securely. Discard empty ink bottles in compliance with local laws and regulations regarding disposal of consumables.
Although, if performed by a professional and with the right equipment, you can expect high-quality printing. Cartridge breakdown – You can only refill your cartridge up to five times.
If the nozzle check pattern does not print out properly, check if any of the missing colors are due to those color ink tanks being empty. If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly.
This most likely means that one or more of the colors are not printing correctly. The best way to find this out is to perform a Nozzle Check.
Ink or toner: If the printer`s red ink or toner cartridge is low or empty, it may not be able to print red. Check the ink levels and replace the cartridge if necessary. Blocked nozzle: Sometimes, the nozzle that dispenses red ink may become clogged with dried ink or debris, preventing it from printing properly.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon Pixma IP4300

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Pixma IP4300

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :

Canon Pixma IP4300

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon Pixma IP4300

Canon MP560 PGBK not printing top grid
ANSWER : Hello, I have the same problem a number of people on this forum have raised in my Canon IP4500 – the PGBK ink is not printing at all, despite several deep cleansing cycles, soaking the print head overnight a few times. If you could advise any potential fix, that would be great. My email is [email protected]

Read Full Q/A … :

Canon Pixma IP4300

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Pixma IP4300

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon Pixma IP4300

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon Pixma IP4300