Canon Pixma IP3000

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
Check1 Check the remaining ink level. Check2 Are print head nozzles clogged? Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see If Printing Is Faint or Uneven.
If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.
When the printer doesn`t print black ink, the most likely reason is the print head nozzles, which, when clogged, prevent it from releasing black ink onto the paper. It may also stop printing black if the black ink has run out or if the black ink cartridge is clogged.
Test Your Toner Density First

To ensure this isn`t the issue, remove the toner cartridge, shake it a few times, and insert it back into the printer. If the next page you print is darker, that means that your printer is low on toner density. Next, try replacing a light printing toner cartridge with a fresh one.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
How to Reset Canon Pixma Ink Cartridge. In many cases, you can press and hold the “ok” or “resume” button on the front of the printer for about 10 seconds. This prompts resetting Canon ink cartridge and should allow you to continue printing.
You can only install two black ink cartridges if your printer uses two different types of black ink. If you are trying to install a black ink cartridge in a color cartridge slot, your printer will not function and you could potentially cause damage to the machine.
If using the color cartridge, colors print normally but black prints lighter than usual. You can continue to print until print quality becomes unacceptable.
Here`s how to perform a hard reset: Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing. Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times. Step 3: This should have restored your device to its original factory setup.
Ink flush consumes a lot of ink, and the consumed ink is discharged to the maintenance cartridge. If the free space is low, replace it with a new maintenance cartridge. If the available capacity of the maintenance cartridge is low, a message is displayed and ink flush cannot be performed.
When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement. Request either Canon or the dealer you purchased the machine for a repair service.
There are a number of reasons why ink is not flowing through the cartridge, despite there being plenty of ink in the cartridge. The most common cause for this is infrequent usage. If your printer is not used on a regular basis, at least once a week, the cartridge can dry up and then become clogged as a result.
A print head scratch occurs when an accumulation of dust or debris gets stuck in your machine. And if this happens, the damage cannot be fixed. In most cases, you would need to purchase a new printhead. That`s why it`s important to keep the dust out, away from your machine.
If ink is not coming out when you perform printing for the first time, it is possible that ink is not flowing into the printer properly. Make sure each ink tank is filled with ink to its upper limit and perform ink flush. If the problem is not resolved yet, the print head may be damaged.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Printing with an empty cartridge will soon cause printhead nozzles to overheat and fry remaining ink solid.” So, if you must continue to print, use the “Printing Preferences” dialog, on the “PAGE SETUP” tab, with the “PRINT OPTIONS…”, “Print With:” option: “All Colors (Default)”, “All except PGBK (Black)”, or “Only …
Ink cartridges can usually last two or three years if properly packaged and stored. But in a standard case, they will eventually dry out and become useless after this period. However, many major ink cartridge makers don`t put expiration dates on their cartridges.
If ink is not coming out when you perform printing for the first time, it is possible that ink is not flowing into the printer properly. Make sure each ink tank is filled with ink to its upper limit and perform ink flush. If the problem is not resolved yet, the print head may be damaged.
BK ink is intended for photographs, it`s richer. The printer defaults to PGBK for text, lines etc – unless it thinks they are part of a photo. So, you can force a Canon printer to use BK ink instead of PGBK by telling it that you are printing a photo onto plain paper.
There are two kinds of black ink in the machine: dye ink (BK) and pigment ink (PGBK). The dye ink is used mainly for printing photos, illustration, etc., and the pigment ink is used for text-based documents. Each has different purposes so that even if one runs out, another will not be used instead.
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Pixma IP3000

canon mp610 doesn't print black
ANSWER : Hello – I have an MP610 which has worked well for a number of years.

Read Full Q/A … :

Canon Pixma IP3000

Pixma iP3000, Clogged Cyan print head?
ANSWER : I have had similar problem with an IP3600, but only since upgrading OS from WindowsXP to Windows7 a few weeks back, and only with the PG fat Black ink.

Read Full Q/A … :

Canon Pixma IP3000

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon Pixma IP3000

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon Pixma IP3000

Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.

Read Full Q/A … :

Canon Pixma IP3000

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon Pixma IP3000

Canon MP610 stopped printing black
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon Pixma IP3000