Canon Bubblejet (BJ) 5

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The E,5,9 error indicates a problem with the paper size setting. You will need to check the paper size setting at the printer and on your computer. They will need to be the same.
Ink has run out, the print head nozzles are clogged, the paper output tray has been exposed to a strong light source preventing correct print head alignment. Press the RESUME/CANCEL button. See “Printing the Nozzle Check Pattern” in the Quick Start Guide, for information on how to print a nozzle check pattern.
Five flashes:Print Head is not installed/Print Head is defective. Follow the directions given in your setup manual to install the Print Head. If the Print Head is already installed, remove the Print Head once and then reinstall it. If the error is still not resolved, the Print Head may be damaged.
Ink tank is not installed properly./Ink may have run out. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Install an appropriate canon ink cartridge. If the lamp on the ink tank is flashing, ink may have run out.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
When those lights are lit, that is an indication that the ink cartridges would need to be replaced.
The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Two flashes: Printer is out of paper./Paper does not feed. Reload the paper in the Rear Tray, Cassette, or Manual Feed Slot of the Front Tray and press the RESUME/CANCEL button.
Fifteen Flashes:Ink tank cannot be recognized

An Ink tank error has occurred. (The lamp on the ink tank is off.) Replace the ink tank. This section describes the procedure to replace an ink tank if ink runs out while printing is in progress.

Number of flashes = 12 flashes / Support Code = 4100

The following ink cartridge cannot be recognized as a genuine Canon cartridge: Make sure that genuine Canon cartridges are all installed. To continue printing, install a genuine Canon cartridge. To cancel printing, click Cancel Printing.

This issue could be due to the printer being dirty (excess ink in the ink cartridge tray or ink overflow tray). Try cleaning the printer thoroughly and installing the cartridges again to see if this fixes the problem.
– POWER lamp flashes white: The printer is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the printer is not ready to print.
– ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print.
Among the more common technical issues that may bring down a printer are disconnected cables, malfunctioning routers, and low ink levels. Moreover, software problems such as interrupted connections or incorrect settings in your system`s drivers can also cause your printer to show up as offline.
This issue could be due to the printer being dirty (excess ink in the ink cartridge tray or ink overflow tray). Try cleaning the printer thoroughly and installing the cartridges again to see if this fixes the problem.
An E9 error occurs when the printer detects that ink system maintenance is required. An Ink System Maintenance page prints containing instructions to open and close the printhead access door to resolve the error.
This issue could be due to the printer being dirty (excess ink in the ink cartridge tray or ink overflow tray). Try cleaning the printer thoroughly and installing the cartridges again to see if this fixes the problem.
An E9 error occurs when the printer detects that ink system maintenance is required. An Ink System Maintenance page prints containing instructions to open and close the printhead access door to resolve the error.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Trying to reset Canon MP280's waste absorber
ANSWER : SSSSS

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Service Manual needed to check PS Voltages
ANSWER : I really doubt you can find a service manual for it, if they even exist.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon iP90 Service Error Message 5C00
ANSWER : Have same problem what the fix

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MP140 – Disable printer, use scanner only?
ANSWER : Dude, God bless ya. I was crazy trying to find a method to use the MP140 as scanner only. Thank you so much!!!!!

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon i850 light flashing orange
ANSWER : I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck

Read Full Q/A … :

Canon Bubblejet (BJ) 5