Canon Personal Copiers (PC) 7
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
If you connect the printer to your computer via a USB cable, check whether the cable is properly connected. If it isn`t, re-plug it and make sure they are properly seated into the ports on both your printer and your computer. Try another USB port on your computer in case the one you previously used is broken.
Although printer errors can differ by from model to model, typically the E5 printer error for Canon Pixma printers refers to a problem with an ink cartridge. Possible causes of the error include: Ink cartridge is not installed properly. Wrong ink cartridge installed (unsupported type of cartridge)
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Then, try the Printer troubleshooter, which will attempt to automatically diagnose and fix your problem. Open the Printer troubleshooter by clicking the Start button , and then clicking Control Panel. In the search box, type troubleshooter, and then click Troubleshooting. Under Hardware and Sound, click Use a printer.
This issue could be due to the printer being dirty (excess ink in the ink cartridge tray or ink overflow tray). Try cleaning the printer thoroughly and installing the cartridges again to see if this fixes the problem.
The E,5,9 error indicates a problem with the paper size setting. You will need to check the paper size setting at the printer and on your computer. They will need to be the same.
The Canon Printer Error Code E05 indicates that the ink cartridge is not installed properly. There are several ways to fix this error, including checking the ink cartridge for damage and making sure it is properly seated in the printer. You can also try cleaning the contacts on the ink cartridge and printer.
Even if your cartridge is full and ready for action, it may have become slightly dislodged and no longer in full electrical contact with the printer. The easiest way to rectify this potential problem is to simply remove and reinstall the cartridges.
Check if the paper that you`re using matches the paper type in your printer setting. Check if the printer is on a flat and stable surface. Most printer models won`t work if it`s tilted in an angle. Clean the print head in case of clogged nozzles.
Restart Your Printer and PC
Many times, a simple reset can resolve the issue. Restarting your printer and rebooting your PC may clear up the issue that causes your printer to print blank pages.
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
canon mx 700 error code 5100
ANSWER : The problem is how the hell do you put your hand in there to clean it? I have tried but could not clean it properly, hence my printer still has that error.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
printer error code unable to print 4f
ANSWER : Follow these instructions:
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048
Read Full Q/A … :
Canon Personal Copiers (PC) 7