Canon Personal Copiers (PC) 7
Experienced technical support provide their insights in answering this question :
I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.
Four flashes – The cartridge is not installed properly. Five flashes – The cartridge is not installed properly. Seven flashes – The cartridge is not installed in the correct position. Eight flashes – Ink absorber is almost full.
Seven Flashes: FINE Cartridge is not installed in the correct position. Make sure that each FINE Cartridge is installed in the correct position.
Light flashes repeatedly orange. Machine is out of paper. Reload the paper in the rear tray. Press the Black or Color button to restart the print job.
If your router is blinking orange, it is likely getting an upgrade and you should give it time before doing anything. However, if your internet is unavailable or slow, it can get stuck and the blinking will not stop. Resetting the router and the modem normally resolves the problem and restores the connection.
Are you wondering why my printer is showing orange light? It indicates firmware issues, paper jams, or improperly installed cartridges. Resolve it by performing a power reset of your printer. Take out the installed cartridges.
Number of flashes = 7 flashes / Support Code = 1486, 1487
– An ink cartridge is not installed in the correct position. Install the following ink cartridge in the appropriate position. If printing is in progress, cancel printing and install the ink cartridge.
The E07 error message appears when your Canon Pixma printer detects that the “FINE Cartridge is not installed in the correct position”. A `FINE` cartridge refers to a stand alone black or tri-colour cartridge (with a printhead attached) that is used exclusively in two cartridge printers.
Table 1: The lamp flashes repeatedly orange. The printer does not support the paper size you specified. Select the Resume / Cancel button, specify the proper paper size, then print again. The printer is out of paper or isn`t feeding correctly, or the disc tray isn`t attached.
Seven flashes – The cartridge is not installed in the correct position. Eight flashes – Ink absorber is almost full. Thirteen flashes – The remaining ink level cannot be detected.
The orange boot light indicates the camera is waiting for connection from the computer. Follow our Loading Cameras – Troubleshooting Guide for help loading cameras.
Orange Alternately. Note: According to canon support 👉 Two flashes: Printer is out of paper / Paper does not feed, reload. paper on the Rear Tray and press the RESUME/CANCEL.
If the orange light is blinking, it`s likely indicating an issue with the power supply. A static orange light, however, possibly indicates a problem with your RAM, or that one of your components isn`t properly connected to the motherboard.
Supposedly, a flashing orange light (after putting a battery in the charger) means that the batter is dead (been charged too many times) or is damaged.
A blinking orange light on your PS4 means it is charging in rest mode. If your controller isn`t charging while on standby, go to Settings > Power Save Settings > Set Features Available in Rest Mode > Supply Power to USB Ports and choose one of the options.
Check to make sure there are no paper jams or other obstructions. Unplug the printer for approximately two minutes, then plug it back in.
Error 7 indicates a general disconnect from the game server.
Restart the Steam. In order to fix Steam error code 7, you can choose to restart the Steam. In general, restarting the Steam is able to fix the connection problem.
The orange plastic piece holds the ink carriage in place when the printer is first boxed up. That piece is designed to be removed from the printer when the printer is set up for the first time. The orange plastic piece can be thrown away.
Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it. An ink cartridge is expended or not installed correctly. Replace or reinstall the cartridge.
An E7 error usually indicates a mode problem between the indoor and outdoor units. The error is usually cleared by power cycling both the indoor and outdoor unit by turning the power off at the breaker. For more advanced troubleshooting, the wiring voltage and PCB board will need to be checked.
When a printer error occurs, the light on the front of your printer flashes orange as shown below. Five flashes means the print head is not installed or is defective.
When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.
Thirteen flashes: The ink level cannot be detected. Possible Solution: Replace the ink tank and close the top cover.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon i850 light flashing orange
ANSWER : I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
PIXMA MX300 in-use/memory light
ANSWER : I know it sounds like voodoo, but I followed the steps at this link http://princes-repair-print.blogspot.com/2010/10/how-to-reset-canon-mx300.html and it solved my in use/memory light problem. It basically takes it back to a factory default shipping setup.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon Printer reset tool for MP100 MP400 series
ANSWER : Thanks a million for this. I have just managed to get my MP460 Ink levels reset having tried lots of other sites and failed.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Personal Copiers (PC) 7
Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.
Read Full Q/A … :
Canon Personal Copiers (PC) 7