Canon LBP 4

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Four flashes:Ink tank is not installed properly/The clear ink tank is not installed/Ink may have run out. If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Install an appropriate ink tank. The clear ink tank is empty.
Meaning: the paper exit tray is closed / Paper jam. Solution: the paper is jammed. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.
Four flashes – The cartridge is not installed properly. Five flashes – The cartridge is not installed properly. Seven flashes – The cartridge is not installed in the correct position.
When the printer starts blinking orange light, then there might be some issues with the printer cartridge, toner, or simply there are some corrupted configuration settings. You need to contact the proper HP support & maintenance team to check the exact cause of this problem in your system.
The E 0 4 error is an indication that your PIXMA TS3122 does not recognize one of the ink cartridges installed. The light should be on by either BK or CL (or both). Whichever light is lit, please replace that cartridge (or both).
For four flashes: Check whether the ink cartridges are installed properly. If not, remove and install them properly. Similarly, count the number of flashes and perform the necessary steps to fix the orange light flashing problem.
Check to make sure there are no paper jams or other obstructions. Unplug the printer for approximately two minutes, then plug it back in.
Four flashes: Ink has run out

Ink has run out. Replace the ink cartridge and close the cover. If printing is in progress and you want to continue printing, press the RESUME/CANCEL button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.

The ink lamp is flashing. The ink is running low. Prepare a new ink tank. The resulting print quality may not be satisfactory, if printing is continued under this condition.
Fifteen Flashes:Ink tank cannot be recognized

An Ink tank error has occurred. (The lamp on the ink tank is off.)

The orange plastic piece holds the ink carriage in place when the printer is first boxed up.
It may be that your network/internet connection was briefly interrupted. First, try to refresh the page in your browser. This will usually solve the problem. If that doesn`t work, try fully closing your browser, opening it again and reloading the video.
When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.
Orange Alternately. Note: According to canon support 👉 Two flashes: Printer is out of paper / Paper does not feed, reload. paper on the Rear Tray and press the RESUME/CANCEL.
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
Install an appropriate canon ink cartridge. If the lamp on the ink tank is flashing, ink may have run out. Replacing the ink tank is recommended.
There are two indicator lights on the printer: the Status light and the Charging light. Each indicator light shows the status of the printer as described below. Status indicator light: A blue or green light indicates the printer is operating correctly, while red indicates an error has occurred. Indicator light color.
Thirteen flashes: The ink level cannot be detected. Possible Solution: Replace the ink tank and close the top cover.
A Canon PIXMA FINE inkjet cartridge contains the full gamut of colours needed to produce stunning quality prints and documents. Inks and print head are combined in a single handy unit, which can be easily replaced in seconds. The FINE cartridge system also gives you fast printing speeds, for when every second counts.
The power light is on or flashing. The ink light is flashing. Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it.
Once the printer has found your Wi-Fi, you will see the light on the printer begin to flash. Once the light stops flashing, your printer is now connected to the Wi-Fi network. To confirm that your printer is correctly connected to the Wi-Fi network you can do a test print of your printer`s network settings.
Supposedly, a flashing orange light (after putting a battery in the charger) means that the batter is dead (been charged too many times) or is damaged.
Synology STATUS LED flashing Orange: meaning

DSM operating System is not installed. Solution: Install DSM operating system.

If you are shooting in a scene with tungsten lights, you put the orange cover (gel) sometimes called CTO (color temperature orange) to balance the light generated from the flash to match the other lights.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon i850 light flashing orange
ANSWER : I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck

Read Full Q/A … :

Canon LBP 4

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon LBP 4

Red Light – Please help!
ANSWER : Here is the vid:

Read Full Q/A … :

Canon LBP 4

5 orange blinks – what do I do?
ANSWER : http://www.justanswer.com/printers/4mvy4-canon-pixma-ip5200-orange-alarm-light-flashing.html

Read Full Q/A … :

Canon LBP 4

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon LBP 4

Canon MX922 printer with B200 service code
ANSWER : Try green copy button and red triangle in a circle together while releasing the power button upon restarting printer.

Read Full Q/A … :

Canon LBP 4

Canon MP600 died
ANSWER : hey guys I found this on the net check it out maybe somebody can make something out of it cuase they omitted this part on the service manual that I attained cause I have the same problem hope this helps.

Read Full Q/A … :

Canon LBP 4

All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one

Read Full Q/A … :

Canon LBP 4