Canon Bubblejet (BJ) 5

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

#005. The recipient did not answer within 35 seconds. Confirm that the recipient`s machine is able to communicate, and then try again. The receiving machine is not a G3 fax.
Although printer errors can differ by model number, the E5 printer error for Canon printers refers to a problem with an ink cartridge. Possible causes of the error include: Ink cartridge is not installed properly.
In such cases, even though the printer`s ink supply system is working properly, the design of the non-genuine ink tank is obstructing fluid ink supply to the print head, causing the B504 error.
The Failed (Fax negotiation failed) error could occur for different reasons: • The system initiated a fax transmission but could not synchronize with the far-end fax. • A remote fax machine was detected, but the sending and receiving modems could not establish communication.
Support Code=5500, 5501

Ink tank has not been properly recognized. Contact the service center.

Error Code 5 is a Windows error code that appears when the user does not have sufficient permission to access the requested file or location.
This error can sometimes occur even when you`re not trying to print, or if you don`t have a printer installed. To overcome this issue, the first thing to check is to make sure you have the latest printer driver installed for your printer.
The 504 (Gateway Timeout) status code indicates that the server, while acting as a gateway or proxy, did not receive a timely response from an upstream server it needed to access in order to complete the request. The error may be a temporary occurrence due to too much traffic toward the server or site.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover. Once cartridges have been removed they can be re-install them by firmly pushing them back in until they click into place.
If your machine has FAX functions:

Press Settings. Press the Up or Down arrow key to display Network, and then press OK. Press the Up or Down arrow key to display Network Reset, and then press OK. Follow the machine`s instruction to reset the network settings.

Check for phone line connection issues that might cause fax receiving to fail. Confirm the fax cords are in the correct ports: The phone line should be connected to the 1-LINE port and the answering machine, if used, should be connected to the 2-EXT port on the back of the printer.
Error 5500 Crash – Error 5500 will stop the machine from performing a regular program operation. These errors typically occur when Microsoft Access inputs can`t be correctly processed, or it`s confused by what is supposed to be output.
Fix 5: Change User Account Control Settings

The User Account Control (UAC) may block you adding new program/software. Therefore, you should turn it off in order to avoid system error 5. Type UserAccountControlSettings into Windows search box. Select UserAccountControlSettings from the result or just hit Enter.

Error 5 means something`s wrong with the HTML / JS in general, or you`re calling the function before things get loaded.
Error code 5 means your client hasn`t updated to the latest version yet. (once you`re updated to the latest version, it will say “Update required” instead of the ambiguous Error code 5. Try restarting steam, or validating the cache.
Paper Jam in Input Tray.
What is Printer Error #5? You will receive this message when you attempt to open/print in AccountEdge without a printer attached. Make sure you have a printer driver installed on your computer, and you have a default printer selected.
A 502 bad gateway means that the server acting as the gateway received an invalid response from the main server. A 504 gateway timeout means that the server acting as the gateway didn`t receive a response at all from the main server.
HTTP 503: This error indicates that one or more cluster nodes don`t have enough capacity to handle the request. For more information, see How do I resolve an HTTP 503 Service Unavailable error in Amazon OpenSearch Service? HTTP 504: This error happens when a request fails to complete within the idle timeout period.
504 Plan Defined

The 504 Plan is a plan developed to ensure that a child who has a disability identified under the law and is attending an elementary or secondary educational institution receives accommodations that will ensure their academic success and access to the learning environment.

The HyperText Transfer Protocol (HTTP) 500 Internal Server Error server error response code indicates that the server encountered an unexpected condition that prevented it from fulfilling the request.
Error code 4 shows the Error message “you have been disconnected from Call of Duty, Modern Warfare servers.” and asks you to visit the Activision support page. This error is most commonly encountered while connecting to the Warzone servers.
HP Printer Error E4 means that the FINE cartridge in your printer device is not installed appropriately. To move out the cartridges, you will require to push the output tray back in before opening the cover.
#404. Writing failed because the write protect switch of the memory media was enabled. Disable the write protect switch of the memory media.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

ERROR On New Canon iR Advance C2030
ANSWER : Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon iP90 Service Error Message 5C00
ANSWER : Have same problem what the fix

Read Full Q/A … :

Canon Bubblejet (BJ) 5