Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement. Request either Canon or the dealer you purchased the machine for a repair service.
If your Canon printer isn`t recognising a compatible ink cartridge, this may be because the data on the cartridge chip is stamped with an empty status before it was remanufactured. Hold down the stop / cancel button for 5 seconds to bypass the `ink has run out` message and your cartridge should work.
If there is plenty of ink and the printer does not print, clean the Print Head then print the nozzle check pattern to ensure ink is ejected properly. If the problem is not resolved after performing Print Head Cleaning twice, carry out the Print Head Deep Cleaning.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Using a clean, lint-free, and dry cloth, gently wipe the metallic contacts and the connection point. Make sure that all dirt and residue are wiped clean. Reload the new ink cartridge back into the printer. Turn on the printer and do a test print to see if the ink cartridge gets detected.
When the printer asks you to disable detection, press and hold the Stop button for at least 5 seconds before releasing it. On that color, ink level detection will now be disabled. It will be your obligation to periodically check the cartridges and refill them well before they are empty.
Trick the printer.

Low ink doesn`t mean no ink. Remove the cartridge, wipe it with a lint-free cloth and reinsert it. This process can fool your printer into “thinking” you`ve put in a new cartridge and may help it eke out a few more pages.

The bottom part of the printer Canon Pixma is fully covered with sponges and forms the so-called waste ink tank. Each time you clean the printheads on your inkjet printer, ink is sucked out of the printer`s print nozzles and out of the cartridges, and into the sponges on the bottom of the printer via one or more hoses.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
You can continue to use the product even if one or more ink tanks are not filled all the way. However, for the most accurate ink level monitoring, fill all the ink tanks up to the top line. Caution: Wear disposable gloves while refilling the ink tanks to avoid staining your hands.
The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
On your computer, in the Windows Notification Area (bottom-right corner of your Windows desktop), right-click the printer icon. In the printer menu, select the Properties or Preferences option. In the printer settings window, the ink or toner levels are displayed for the currently-installed cartridge(s).
In contrast, thermal printers do not apply ink or toner to the paper. Instead, they use special paper coated with a heat-sensitive layer that changes color as soon as the paper gets close to a heat source. Thermal printers require the use of specialized paper that changes color when exposed to heat.
You can continue to print with one or more empty cartridges, but HP recommends replacing them as soon as possible to avoid printhead damage.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Yes, you do. CompAndSave`s cheap ink for Canon printer is the answer. Remanufactured or compatible ink cartridges for Canon printer produce the same quality prints, but you`ll get them at a much lower cost.
How long does Canon ink last? Canon ink can last for up to two years in its sealed packaging. Even after two years, you may still get some more life out of the cartridge, so it may be worth trying after the fact.
About SETUP ink tanks

If an ink tank is labeled “Setup,” it means the tank is intended for the initial setup of your printer. Setup tanks have as much or more ink than the standard replacement ink tanks. Setup ink tanks aren`t available for purchase. You can only get them with the purchase of a printer.

Here are our recommendations: Generally, the average lifespan of an inkjet printer is around 3-5 years under normal usage. If you use the printer more frequently than average or if you`re using it for a business, you might find the life of your printer is shorter.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :
Unknown Printer

MP390 Waste ink tank full.
ANSWER : Thank you very much. Followed the reset and alarm light instructions and works great! Saved at least $100 service fee and/or replacing our printer.

Read Full Q/A … :
Unknown Printer

Canon pixma – ink absorber almost full
ANSWER : They are on the bottom of the printer. If you want to clean them, you can take them out and wash them in hot tap water. Wring them out like a sponge. You will need to reset the printer. http://jezpinions.blogspot.com/2012/03/canon-mg6150-ink-absorber-reset-error.html

Read Full Q/A … :
Unknown Printer

MP170 (5b00) Ink Tank Full Error
ANSWER : Thanks, worked a treat!

Read Full Q/A … :
Unknown Printer

Ink Tank Cannot Be Recognized(Canon mp500)
ANSWER : My MX922 ran out of yellow (slowly) then didn’t recognize first one and then a second new Canon CLI-251 yellow cartridge. I’ve always used Canon. Then I inserted a 251a Y (extra large) yellow, and it worked immediately – for how long, I don’t know. Guess I’ll order another set of XL ink tanks – either that or a new printer.

Read Full Q/A … :
Unknown Printer

ip4200 INK TANK RESET and WASTE TANK RESET
ANSWER : Different cartridges, notwithstanding, don’t have a ‘fill gap’ so you’ll have to make one yourself. Our refill units for these sorts of cartridges accompany a smolder apparatus which is utilized to blaze (really dissolve) a fill opening in the cartridge . Our refill guidelines will demonstrate you precisely where to make the fill opening (you would prefer not to make it in the wrong spot). A blaze device come standard in all refill packs for cartridges without processing plant made fill openings. if you want to get proper detailed information then call us at 1-888-924-2961for more information regarding canon printer support.

Read Full Q/A … :
Unknown Printer

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :
Unknown Printer

Magenta ink shows full, but not printing
ANSWER : One thing to try is to remove the printhead and flush the magenta nozzle under hot running tap water. Take all the ink out and there is a lever on the right that releases the print head from the assy.

Read Full Q/A … :
Unknown Printer