Canon Personal Copiers (PC) 14
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If you have experienced this issue with multiple cartridges it may be that the corresponding contacts inside the printer have become obscured or even damaged. Thankfully these contacts can be easily accessed by removing the cartridge from the printer and can also be cleaned using the same kind of tissue.
The E 0 4 error is an indication that your PIXMA TS3122 does not recognize one of the ink cartridges installed. The light should be on by either BK or CL (or both). Whichever light is lit, please replace that cartridge (or both).
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
The ink tank cannot be recognized.
The default user name for the administrator is “Administrator” and the default password is “7654321“. When you are going to operate the machine as “Administrator,” change the current password to improve the security.
However, for the most part, the E4 error code means that the unit is entering defrost mode. You will hear a difference in the fan speed when your unit changes. When the fan motor slows, it sounds like the unit performs as an air purifier or dehumidifier. It basically just passes air over the unit without cooling it.
E, 1, 6 (LED display)
The ink has run out. Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the machine`s Stop/Reset button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.
Error code E05
This error code may cause an orange light on your machine to blink 5 times and is caused by the print head not being installed at all or it may have been installed incorrectly.
Once the printer believes the cartridge has run out of ink you will be presented with either the E13 message or the E16 message that indicates that you need to change the ink cartridge. If this message is being displayed on your printers screen then your printer will stop printing and scanning.
This mode means the printer is ready to use (as scanner) without ink cartridges. PAPER will continue moving and eventually coming out from front lid.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Once the printer believes the cartridge has run out of ink you will be presented with either the E13 message or the E16 message that indicates that you need to change the ink cartridge. If this message is being displayed on your printers screen then your printer will stop printing and scanning.
A cartridge may not be installed properly or this printer does not support the cartridges. If you are printing, press the printer`s Stop button to cancel printing. Remove the cartridges and reinstall them properly following the steps below. This may resolve the error.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
ERROR On New Canon iR Advance C2030
ANSWER : Error E020-060 was solved by changing the new memory chip with an old one. It worked very well.
Read Full Q/A … :
Canon Personal Copiers (PC) 14
canon MX700 6A80 error, head locked
ANSWER : I bought a canon pixma 7240 but on my first use I turn it on and the power lamp and error lamp blink alternatively the print head is stuck not moving please help I can’t even put the cartridges. My email [email protected] phone number 0719013770.
Read Full Q/A … :
Canon Personal Copiers (PC) 14
CANON P200- ERROR 5100 PLEASE HELP!
ANSWER : Read this for solutions http://www.mytechtime.com/2011/10/canon-error-5100-how-to-fix.html
Read Full Q/A … :
Canon Personal Copiers (PC) 14
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Personal Copiers (PC) 14
Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.
Read Full Q/A … :
Canon Personal Copiers (PC) 14
Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?
Read Full Q/A … :
Canon Personal Copiers (PC) 14
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Personal Copiers (PC) 14
Canon iP90 Service Error Message 5C00
ANSWER : Have same problem what the fix
Read Full Q/A … :
Canon Personal Copiers (PC) 14