Canon FC 1

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Dirty or misaligned print heads

Your printer may be printing fuzzy, blurry, or other faint text because of dirty print heads. All modern printers have a self-cleaning mode, which cleans the print heads, and additional internal equipment used in the printing process.

Printers may produce poor quality printing if they are exposed to too much heat. Don`t place your printers in a high-temperature area or near other devices that produce excess heat. In addition, keep them away from windows, where heat and humidity can be high.
1. Dots are typically caused by foreign material inside the machine (for example paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages. 2.
If your printer is spitting out pages full of strange characters, symbols, or strange formatting, your inkjet printer drivers may be outdated, incompatible with your operating system or corrupt. Drivers are important to the proper function of your inkjet printer and it is best to check for updates regularly.
If a printer`s cartridge assembly is a little off the alignment, it won`t print every line in a misaligned way. Instead, it can print a few lines correctly and if the problem accumulates, the printer will print few bad lines.
This is usually a problem with drivers. The only way to solve the problem is to install new drivers or update the one you have been using. Usually, weird characters appearing on your printing papers means there is no communication between your printer and the computer it is connected to.
White lines will typically start appearing on your print outs due to a clogged up printer head. Your first port of call when solving this problem is to run the cleaning program on your printer, which should be accessible through its settings menu.
If you find dots or spots appear on your printed documents this is usually caused by paper dust or objects such as staples or paper clips sticking to the surface of the drum. Toner builds up around these areas which in turn creates the dots or spots which then appear on your print-out.
Ghost prints happen when the drum or fuser unit within your printer become faulty. Because a fault with this element won`t heat the particles of the toner to a high enough temperature, the marks being made on the paper are much lighter in colour and appear more faded than typical documents.
Check the Ink Cartridge Installed. One of the most common reasons behind color printing issues in the Canon printer is an empty cartridge. You should first check whether your cartridge still has ink. First, open the printer`s front door and remove the cartridge slowly and carefully.
Check the Ink Cartridge Installed. One of the most common reasons behind color printing issues in the Canon printer is an empty cartridge. You should first check whether your cartridge still has ink. First, open the printer`s front door and remove the cartridge slowly and carefully.
If your printouts are blurry or smeared, try these solutions: Make sure your paper is not damp, curled, old, or loaded incorrectly in your product. Use a support sheet with special paper, or load special paper one sheet at a time. Make sure your paper meets the specifications for your product.
If your printouts have incorrect colors, try these solutions: Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
If your printouts have incorrect colors, try these solutions: Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon FC 1

Canon MP530 won't print black
ANSWER : I have the same problem with my canon MG6120, no PGBK. all other colors print beautifully. I am guessing the purge unit needs attention. I have cleaned the print head several times. Your advice would be appreciated.

Read Full Q/A … :

Canon FC 1

Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.

Read Full Q/A … :

Canon FC 1

Print problem with Canon MP620
ANSWER : Open the front of the printer.

Read Full Q/A … :

Canon FC 1

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon FC 1

Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.

Read Full Q/A … :

Canon FC 1

Canon MP560 PGBK not printing top grid
ANSWER : Hello, I have the same problem a number of people on this forum have raised in my Canon IP4500 – the PGBK ink is not printing at all, despite several deep cleansing cycles, soaking the print head overnight a few times. If you could advise any potential fix, that would be great. My email is [email protected]

Read Full Q/A … :

Canon FC 1

Canon Pixma MP610 won't print in black
ANSWER : Printer cleanings use wet ink to clear dried up ink. Yeah, that works real well. The best way to clean the heads is remove all the ink tanks. Next to the tanks on the right, there is a plastic release lever. Pull up on it and it will release the heads. Reach in and pull them out. Take the heads over to the sink and run hot tap water into the screen for the black and then turn it over and run it over the heads on the bottom. Repeat a few times and reinstall.

Read Full Q/A … :

Canon FC 1