HP CopyJet Color

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer. If a Single-cartridge mode message displays, select OK. If you are using the black cartridge, prints are in black and white (grayscale).
The reason may be quite simple – your cartridge is dry or clogged. Still, adding fresh ink may not resolve the situation. Try to wipe the cartridge with a lint-free cloth dampened with isopropyl alcohol. Please avoid touching the metal parts of these cartridges and the chip not to damage their electrical contacts.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Right-click the printer that you want to use, and then click Printing preferences. Make your choices, and then click OK. Under option Print color select color , then the OK button. Now the printer is set to print in color.
Disable the Cartridge Policy feature

In the Device Management pane, select the printers (or printer group) to configure. In the bottom navigation pane, select Config, and then select Supplies. In the Cartridge Policy section, select Off. Click Apply.

The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
Print In Single Cartridge Mode

For instance, the HP ENVY series allows you to print in single-cartridge mode. When it comes to printing a single color i.e black, you can perform your printing activity by simply removing the tricolor cartridge and letting your printer default settings to use only black ink.

There are a number of reasons why ink is not flowing through the cartridge, despite there being plenty of ink in the cartridge. The most common cause for this is infrequent usage. If your printer is not used on a regular basis, at least once a week, the cartridge can dry up and then become clogged as a result.
First tip is resetting the printer`s memory so it can detect the data from your new cartridge. The second tip is manually cleaning your cartridges to free it from dust or debris so it can function properly. Take note that these tips for your printer not recognizing cartridges are applicable regardless of the brand.
Low Ink Levels

If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I replaced the black toner cartridge and now the printer shakes though it is fine when I set it for grayscale only prints
ANSWER : You need to unlock the carousel. Once you unlock it and remove the toners, ignore all the rest of the crap. Pick any color and align the cartridge slot on the left side like you would have it to remove the cartridge. Then pull out on the gear towards you on the right and drop it so the right slot is lined up as well. You can get it aligned pretty close by just eyeballing it visually. I’ve never seen the left side go out of alignment, just the right, so this method has worked for me everytime.

Read Full Q/A … :

HP CopyJet Color

New ink cartridge won't print
ANSWER : What happens now?

Read Full Q/A … :

HP CopyJet Color

How many pages can I print my compatible Epson Printer Ink cartridge? 1-800-644-5716
ANSWER : What a really bad Google translation. You should get some English speaking person to write up your next scam post.

Read Full Q/A … :

HP CopyJet Color

Expired Ink Cartridges – Any way to move paper with old cartridges?
ANSWER : You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.

Read Full Q/A … :

HP CopyJet Color

canon ip2770 ink cartridge cannot recognized….
ANSWER : Cara mengatasi ink cartridge cannot be recognized printer canon – Printer Canon Pixma Ip 2770 yang telah diinfus dan mengalami kendala pada saat akan menggunakannya kendalanya tersebut ditandai dengan pesan error, “INK CARTRIDGE CANNOT BE RECOGNIZED” Ini adalah trik untuk mengatasinya: Trik menangani masalah “INK CARTRIDGE CANNOT BE RECOGNIZED” Printer anda bermasalah? Blinking 5-7 x orange? Dan muncul pesan “The following ink cartridge cannot be recognized” pada monitor anda ? permasalahan bukan pada catridge nya dan tidak perlu ganti baru, berikut cara nya – Buka cover printer – Cabut cartridge (yang bermasalah) – Tutup cover printer – Matikan printer dan cabut kabel power – Tunggu beberapa saat (kira-kira 5-10 menit) – Hidupkan printer dan langsung buka cover printer – Pasang cartridge (yang tadi anda lepas) – Matikan printer dan cabut kabel power – Hidupkan kembali – Jalankan test print Jika masih bermasalah pastikan tempat catridge anda tertutup dengan benar,jika masih bermasalah juga sebenar nya permasalahan pada infus lubang catridge warna anda, untuk memastikan cobalah anda memasang catridge warna anda yang terdahulu tidak ada masalah,jika tidak ada masalah dengan dengan catridge warna terdahulu,cobalah lepas infusan pada catridge warna anda, jika ternyata bisa tanpa dipasang selang infus catridge warna, maka dipastikan tempat catridge terlalu menekan catridge warna anda.Yang anda butuhkan adalah melakukan coakan pada tempat catridge/dekat per pegas (lihat gambar yang diberi merah dibawah ini)

Read Full Q/A … :

HP CopyJet Color

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :

HP CopyJet Color

cannot recognise new ink cartridge
ANSWER : I followed all the online hints I could find and none worked. So I got to looking at the cartridge ink window and noticed it had a little float inside that was stuck to the bottom. I gently turned it upside down several times to let the float move to the top of the ink tank. It took several try’s but it eventually stayed up about half way. I installed the cartridge again, making sure cartridge clicked in and printer began working.

Read Full Q/A … :

HP CopyJet Color

Epson RX620 Ink cartridges cannot be recognized
ANSWER : Hd snapping the ink cartridges in better, as per other people’s instructions, and no go. I got all frustrated, banged the printer’s side, and reposed in and out the dang cartridges and nada. Got all pissy and told the printer to Proceed with low Levels. I clicked Print and then when the epson printer icon came on, I clicked on settings and Ink supply levels. In here, it said my YELLOW ink was low, and yet on my epson printer screen, it kept saying my black levels were low. wtf. i had an extra yellow as I hadn’t changed it out with the cyan and blue and yep, all working now. geez. try your computer instead of the printer!!

Read Full Q/A … :

HP CopyJet Color