Canon I 350
Whenever I restart my computer in the morning or at any time, I cannot print with the Canon 1rc3580i. I have to remove the printer and then add or re-install the printer before I can print again.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Your problem is most likely connected to the default method that Windows 10 uses to configure printers. Go to control panel>devices and printers and righth click on the icon for your printer and then select the printer properties. Click on the port tab and see what type of port is being used for the driver.
Restart your computer – this often will recover any lost connections with wireless devices. Power off and on the printer, and even the access point or wireless router your printer connects to. Check your printer configuration – you may not be assigned to the correct port for the printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Start by checking your hardware
If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.
If you try to use the printer after it has been out of use for a long time, it may not print properly even if head cleaning is carried out several times. If this is the case, carry out head flushing. If the print heads are still clogged, leave the printer for about ten minutes, and then print the nozzle check pattern.
Your computer may restart when you hit the print command when initiating the printing process. It can occur due to multiple causes, such as corrupt or outdated firmware, unstable electrical supply, or third-party app hindrances.
Hold the on/off button and press the stop button 5 times. Release the on/off button. The printer resets itself and restarts automatically afterwards.
How to Reset Canon Pixma Ink Cartridge. In many cases, you can press and hold the “ok” or “resume” button on the front of the printer for about 10 seconds. This prompts resetting Canon ink cartridge and should allow you to continue printing.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
This issue might have occurred due to corrupt printer drivers or the printer drivers have not installed properly in the computer. I would suggest you to try the following methods and check if that helps. Method 1: Run inbuilt printer troubleshooter and check if it works.
If a printer turns off automatically, it`s likely because of the auto-off feature. Yes, modern printers ship with a feature called auto-off designed to help save power when the printer is not in use.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
Canon I 350
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
Canon I 350
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Read Full Q/A … :
Canon I 350
Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.
Read Full Q/A … :
Canon I 350
cannot print
ANSWER : Epson printers don’t like to sit unused. The printheads will clog with dried ink. Your only hope is to use a Printhead cleaning kit. The Printer’s built in cleaner uses wet ink to flush dried up ink. Yeah, that works real good. Here’s a good source for the kit. http://www.printheadcleaningkit.com/kits.html
Read Full Q/A … :
Canon I 350
HP Deskjet 640c wont print??
ANSWER : yes
Read Full Q/A … :
Canon I 350
Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.
Read Full Q/A … :
Canon I 350
My printing come out blurred
ANSWER : doris…There are usually 2 reasons for blurry output on this printer. First, make sure that the alignment is correct. You can get to it from the maintenance tab on the software that came with the printer. The other common cause of blurring is debris under the printhead. Hope this helps.
Read Full Q/A … :
Canon I 350