Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Seven Flashes:Ink tank is not installed in the correct position. Some ink tanks are not installed in the correct position. (The lamps on the ink tanks flash.)
Canon MG2540 – Error Codes

Three flashes – Paper jam. Four flashes – The cartridge is not installed properly. Five flashes – The cartridge is not installed properly. Seven flashes – The cartridge is not installed in the correct position.

Seven Flashes: FINE Cartridge is not installed in the correct position. Make sure that each FINE Cartridge is installed in the correct position.
When you see P07 error code on your Canon printer, then you should know that it`s due to ink overflow issues. However, there is nothing to worry because your printer already has a system which you can use to clean the excess ink.
Number of flashes = 7 flashes / Support Code = 1486, 1487

– An ink cartridge is not installed in the correct position. Install the following ink cartridge in the appropriate position. If printing is in progress, cancel printing and install the ink cartridge.

Action to correct the error

Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.

Instead, you simply need to override the empty error message that is being displayed by holding down the “stop / reset” button on the printer for around five seconds. The printer should continue printing, and use any of the remaining ink in the cartridge.
Thirteen flashes: The ink level cannot be detected. Possible Solution: Replace the ink tank and close the top cover.
Red Blinking: Cover Opened / Printer Error / No Paper / Paper Jam. Red/White Looping: Low Battery, Very Low Battery. White Blinking: Device is Booting. Blue Blinking: SmartSheet® Error.
The blinking power light indicates that the unit has a cartridge problem. There could be several reasons for this: 1. Incorrect, defective or swapped cartridges.
– ON lamp flashes green: The machine is getting ready to print, or printing is in progress. – Alarm lamp flashes orange: An error has occurred and the machine is not ready to print.
Error 7 indicates a general disconnect from the game server.
Restart the Steam. In order to fix Steam error code 7, you can choose to restart the Steam. In general, restarting the Steam is able to fix the connection problem.
Seven flashes – The cartridge is not installed in the correct position. Eight flashes – Ink absorber is almost full. Thirteen flashes – The remaining ink level cannot be detected.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.
The yellow triangle on the printer is the alarm lamp of the printer; if it is lit, it indicates that there is an item that needs to be addressed on the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon i850 light flashing orange
ANSWER : I normally don’t waste my time with social media crap, but I had to come back to the site were I found some helpful info and possibly help the next person. First: I have a reliable Canon i850 so I’m only addressing that printer’s issues. Second: The tips about cleaning the printhead were a waste of time because, simply stated, the printer is 10 years old and the printhead just needed replacing. Third: I was only able to find the QY6-0064 printhead on ebay and only one of the businesses selling it was located in the US. That’s the one. I received the printhead within 4 days and I popped it into my printer and it started to purrrr just like it has for the past 10 years. I only decided to spend the $66 dollars for the printhead after I became desperate because it isn’t returnable. That risk was worth taking after driving back and forth to the library to print stuff and purchasing an Epson printer that I spent 2 days trying to hook up. I never could get the Epson to work even after numerous support calls and downloads so I returned it and bought the Canon printhead. Good luck

Read Full Q/A … :
Unknown Printer

Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.

Read Full Q/A … :
Unknown Printer

All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one

Read Full Q/A … :
Unknown Printer

HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :
Unknown Printer

Red Light – Please help!
ANSWER : Here is the vid:

Read Full Q/A … :
Unknown Printer

Tray 1 light
ANSWER : Please disregard and delete the post if possible, it was a software problem.

Read Full Q/A … :
Unknown Printer

HP 2550 Solid Lights
ANSWER : I have the same issue. Turned off the printer for a week. Came back it won’t print. It only print blank pages. I removed all color toner cartridges. It caused the printer carousel out-of-realignment. I re-aligned the carousel and put back all cartridges. It still print blank pages. No one on the forum seems to know how to fix this issue.

Read Full Q/A … :
Unknown Printer

All lights flashing on turn on
ANSWER : If it is new, return it and get a replacement.

Read Full Q/A … :
Unknown Printer