Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Make sure that the receiving fax machine is compatible with your machine (For example, check to see if the receiving fax machine is a G3 fax machine). Make sure that there`s enough paper loaded in the receiving fax machine`s paper tray. Make sure that the receiving fax machine is not busy.
PC Fax function

The Canon G7020 printer fax model lets you send and receive faxes directly from your computer. It`s a convenient way to fax documents, especially since it doesn`t require a physical phone line. All you need is to set up the Canon IJ Network Tool on your PC so it connects to your printer.

Check for phone line connection issues that might cause fax receiving to fail. Confirm the fax cords are in the correct ports: The phone line should be connected to the 1-LINE port and the answering machine, if used, should be connected to the 2-EXT port on the back of the printer.
Your fax machine could not establish a connection with your telephone line or modem. Your fax machine fails to connect with your receiver`s phone line. There is a problem with your fax machine`s automatic document feeder or wire cables. There is an issue related to your fax machine ink or toner cartridges.
With the help of eFax online faxing service, you can easily set up your Canon printer with a dedicated fax number and start sending or receiving faxes without the need for additional hardware.
Is a Phone Line Required to Send or Receive Faxes from a Printer? Yes, you need a phone line to fax from a printer. However, if you don`t have a phone line to connect to your printer, you may sign up for an online fax service like eFax to fax from a printer—no phone lines necessary!
The Canon Printer has the ability to send and receive faxes. Enter your department`s ID code and press the ID button at your Canon Printer. Select the Fax tab. Enter the destination fax number on your Canon keypad.
➡️ The FAX number would be the phone number on the home landline that you connect to the printer. You can try to use the printer to dial your mobile phone number, go to “FAX”>>”Send Now”>>enter your mobile phone number>>press black.
To test a fax machine simply fax to somebody else with a fax machine – and have them send a reply fax back to you. When sending the fax, turn on the confirmation page feature – a successful confirmation page shows that the fax machine on the other end has successfully received the message.
When the Windows Fax and Scan doesn`t work normally, you can try to disable the Windows Fax and Scan via Windows Features, restart your computer and then re-enable it again. Sometimes such a simple operation can enable it back to work properly.
Last Update: August 9th, 2021. To test a fax machine simply fax to somebody else with a fax machine – and have them send a reply fax back to you. When sending the fax, turn on the confirmation page feature – a successful confirmation page shows that the fax machine on the other end has successfully received the message …

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

my fax-2840, give me a error that says print unable EC.
ANSWER : Exhaust fan error. If you put your hand over it and don’t feel air coming out, it’s usually dirt or something keeping it from spinning. It almost never goes bad needing replacement. Try blowing it out first. Read this post

Read Full Q/A … :
Unknown Printer

PGBK cartridge not working
ANSWER : Did you try removing the print heads and flushing them under hot tap water?

Read Full Q/A … :
Unknown Printer

printer doesnt work
ANSWER : Next time, when the printer ink of your cartridge gets over, get a refillable printer ink. It is an affordable way to reduce the printing cost and to avoid bearing the sky-kissing rates of cartridge replacements. If its is still in warranty then contact seller.

Read Full Q/A … :
Unknown Printer

Product not working suddenly
ANSWER : Since there aren’t any parts available and this looks pretty much fatal, it would be time to buy a new printer.

Read Full Q/A … :
Unknown Printer

Can't send/receive faxes
ANSWER : Make sure you check that the cable isn’t bad…sometimes unplugging both end and letting cable sit 10-15 minutes then reconnecting is all that it takes for cable to start working again (built up charge in cable dissipates if it is left unplugged for a little bit).

Read Full Q/A … :
Unknown Printer

not detected,tape does not work
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :
Unknown Printer

Color LaserJet 2500 new drum doesn't work.
ANSWER : The drums have a chip on them and it should have reset when you installed it. If not, then read this thread.

Read Full Q/A … :
Unknown Printer

printer not working
ANSWER : Not knowing which printer model (out of over1200) it’s hard to say how to clean the print head. Without the make and model number there is no way we can offer any sound advice.

Read Full Q/A … :
Unknown Printer