Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
What should you do if an inkjet printer prints with missing dots or lines on the page? Clean the inkjet nozzles (manually for older inkjet printers or automatically for newer ones).
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
The paper size and orientation settings must match the paper you`re using in your printer. Besides that, check that the paper is completely blank before printing. Low ink levels and a problematic printer driver or connection can cause the same problems, as the printer can`t complete the job after finishing half a page.
Make sure that your page settings are set to print all pages and to print every page. Settings that cause some pages not to print are `manual duplexing`, `print every other page`, `print odd pages`, `print on both sides`, or similar settings.
Poor print quality is the most common complaint people have about inkjet printers. These problems often show up in the form of horizontal white lines running through each line of print. If you run into these types of issues, you can sometimes fix them by cleaning the print head.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
Quarter page (5.5 x 4.25) prints. The most common size to get your message out to the world!
When your printer can`t print the full document and is skipping some pages, you need to check your printer first. Make sure your printer is securely connected to your PC. The ink isn`t running out and the ink cartridges are not clogged. There`s enough paper in the paper tray.
Check the Margin settings under File>Page Setup to make sure that the right margin is OK. Also check the paragraph format to make sure that you do not have a negative right indent which could be causing the text to extend into an area that is unprintable by your printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

How many pages can I print my compatible Epson Printer Ink cartridge? 1-800-644-5716
ANSWER : What a really bad Google translation. You should get some English speaking person to write up your next scam post.

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :
Unknown Printer

printing blank pages
ANSWER : You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.

Read Full Q/A … :
Unknown Printer

Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.

Read Full Q/A … :
Unknown Printer

HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :
Unknown Printer

incomplete printing of page
ANSWER : the printer for above mentioned problem is an Epson; product name = WF-254

Read Full Q/A … :
Unknown Printer

LaserJet 4 won't Power Up
ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.

Read Full Q/A … :
Unknown Printer