BROTHER PRINTER ERROR 41 STAPELS

Brother Compactronic I

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Machine Error 41 indicates a mechanical malfunction with Brother machine. It is an indication that there is a problem with the printhead on your machine and the machine requires repair. Often, unplugging the unit from the power source and then plugging it back in again can clear this error message.

Damage or corruption of the printer drivers installed on the system can also cause “Printer not activated, error code 41. Users experiencing this issue need to completely remove the printer drivers installed on the system using the device manager and then reinstall the printer drivers.

Error code 41 usually occurs whenever users attempt to print a document or picture and usually occurs when certain changes are made to Windows. For example, users might have installed the wrong drivers, or the responsible service is not running.

This event indicates that some unexpected activity prevented Windows from shutting down correctly. Such a shutdown might be caused by an interruption in the power supply or by a Stop error. If feasible, Windows records any error codes as it shuts down.

(Code 41)” This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list.

The warning “The system has rebooted without cleanly shutting down first” is associated with the event 41 kernel power, which indicates that something unexpected occurred that prevented Windows from going off properly. The system could experience this error if it abruptly crashed, stopped responding, or lost power.

Mac error code 41 may indicate that some of the software or applications installed on your Mac are out of date as well. In this case, updating the software that gives you this error code can help you get out of this trouble.

Error code -41 means that you use wrong Activation Key in EnableDriver method.

The 41.2 error in the LaserJet 5Si, 8000, 8100 and 8150 is typically caused by high voltage arcing that disrupts the beam detect circuit. The most common cause of arcing is a bad connection to the transfer roller.

This error has nothing to do with the laser/scanner—it means “unexpected paper size.” The printer measures paper size two ways: The paper cassette has a set of ridges and/or levers usually found on the right side.

Error code -41 means that you use wrong Activation Key in EnableDriver method.

The error code E04 means Paper Jam.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol

ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Brother Compactronic I

canon printer error

ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :

Brother Compactronic I

Difference Between Laser Printer and InkJet Printer

ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :

Brother Compactronic I

Printer error Oxc18a0201

ANSWER : Have no idea what model you have, but try this forum post or search through the site using your model and error.