Brother MFC 8460N
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message `Replace Fuser` will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.
Push up on the release buttons on both sides of the fuser to release the springs, and then pull the fuser out of the printer. Place the old fuser aside for recycling. Remove the new fuser from its box. Remove the protective packaging.
The message “Replace Fuser” will appear on the display when the machine has printed approximately 100,000 pages (at 5% coverage on letter/A4 paper). The fuser unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams.
As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The message REPLACE LASER will appear on the display when the machine has printed 100,000 pages. The Laser is a periodic maintenance item and should be replaced as soon as possible to maintain optimum reliability. NOTE: The machine will continue to work with the message on the display.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 75,000 pages and as a result has 25% life or less remaining.
Most laser printers will inform you when the fuser unit needs to be replaced. An easy way to identify when a fuser unit needs to be replaced is when smudging or smearing on your printout begins. Smudging and smearing occur when the fuser stops heating the toner particles enough to melt them onto the page fully.
A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
The printer could be dirty. Solution: Arrange to have your printer cleaned. The toner cartridge may be nearly empty. Solution: Replace the toner cartridge.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 75,000 pages and as a result has 25% life or less remaining.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Please help! Replace toner message keeps coming up! Brother DCM-1510
ANSWER : It’s a laser printer, there is no ink. You are going about it the wrong way. Watch this video. You can just skip the first part and go to 1:30 into the video. http://www.dailymotion.com/video/x1yakq1_how-to-refill-and-reset-brother-hl-1110-hl-1112-hl-1112a-dcp-1510-dcp-1512e-mfc-1810_tech
Read Full Q/A … :
Brother MFC 8460N
brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago
Read Full Q/A … :
Brother MFC 8460N
Error Message – Unable to Init. 4F
ANSWER : Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, and then scroll down with the arrow down (round) key. You will find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
Read Full Q/A … :
Brother MFC 8460N
Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W
Read Full Q/A … :
Brother MFC 8460N
Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.
Read Full Q/A … :
Brother MFC 8460N
Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.
Read Full Q/A … :
Brother MFC 8460N
Waste Toner Cartridge is empty but printer is still telling me to replace it
ANSWER : All of the ones I’ve seen are optical. Light shines through a transparent section of the waste box onto a photocell. If toner builds up past that area, it gives a warning to replace it. Possibly toner dust has gotten on the photocell.
Read Full Q/A … :
Brother MFC 8460N
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
Brother MFC 8460N