Brother MFC8820

Verify that all devices on the network where your PC and the Brother machine are connected work correctly. Turn off the Brother machine and turn it back on. The built-in network card may not work for some reason. Turn off the Brother machine and turn it back on, this will reset the network card.

The network connection between your computer and the wireless router may be unavailable or set up incorrectly. If you replaced your wireless router or access point, or changed its settings, reconnect your Brother machine to the new wireless router or access point. >

Printers show up under “unspecified” when Windows cannot associate an appropriate driver. Reference this article to find drivers for your Brady printer: How to Find Windows Printer Drivers for Your Brady Printer. If you have recently installed the driver, simply rebooting your PC can resolve the unspecified status.

Click Start on your computer, then select Devices and Printers. Right-click on the printer`s icon that did not install correctly, then select Troubleshoot. After you confirm that the printer driver for the device you want to use is not installed, select Apply this fix.

Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.

There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.

Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.

In the Devices and Printers window click on Add a printer. Choose “Add a local printer or network printer with manual settings”, then click Next. Select Create a new port and choose Standard TCP/IP Port, then click Next. Under Hostname or IP address: Type in the IP address of the printer you intend to connect to.

Click on “Wi-Fi network” in the taskbar. Select the network you`re connected to. Click on “Properties.” Scroll down to the bottom of the window — your IP will be shown next to “IPv4 address.”