Brother MFC 9700

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The message Drum End Soon indicates the drum unit will need to be replaced soon. Even when the LCD or the status monitor displays the message Drum End Soon, you can still continue to print.
A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won`t break your printer, it will just fail to stop printing at a certain point.
The drum unit may need replacing if you notice the printer producing blurry, low-quality images. Black or colored toner spots on printouts also indicates a failing drum unit. In some cases, horizontal lines may develop across the printout every time the paper passes the failing part of the drum.
What`s the difference between a drum unit and toner cartridge? The toner cartridge is the container that holds the toner powder. The drum unit is an electrically charged cylinder that fuses that toner powder onto paper to create text and images. Both of these components are essential for producing a print.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.
Finally, if your module is old, unreliable or broken, remember that you can simply swap it out for a new one and continue to use your existing pads. Before choosing a module, ensure your pads are compatible, which generally means avoiding using a Yamaha module with Roland pads, and vice versa.
The Brother machine will display a `Replace Drum` or `Drum Stop` message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.
The biggest tell is misprinted pages. If you have a new Brother toner, and the printer still puts out pages with obvious streaking on them – it`s time for a drum unit replacement. Don`t let bad printouts make you seem unprofessional – replace or fix your Brother printer drum today!
Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The yield of a drum unit is approx. 15,000 pages (1 page/job). There are many factors that determine the actual drum life, such as the temperature, humidity, type of paper, type of toner used and so on.
After you have removed the chunks of toner, dip a cotton swab in rubbing alcohol. Carefully wipe off any dirty areas visible on the drum. If the drum unit is dirty, apply some rubbing alcohol onto your lint-free cloth and carefully wipe the body of the drum unit.
To avoid print quality problems, DO NOT touch the surface of the drum unit, only the wheel on the end.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.

Read Full Q/A … :

Brother MFC 9700

MFC 8440 Brother 5 in 1
ANSWER : I have the same problem except both left and right hinges are broke. I’ve removed the and it does work but I’d still like to order the parts and replace them. Where would I find the parts for ordering.

Read Full Q/A … :

Brother MFC 9700

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother MFC 9700

brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago

Read Full Q/A … :

Brother MFC 9700

Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009

Read Full Q/A … :

Brother MFC 9700

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother MFC 9700

brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it

Read Full Q/A … :

Brother MFC 9700

Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?

Read Full Q/A … :

Brother MFC 9700