Brother Compactronic I

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Most of the time, people are getting the blank page from their brother printer due to the ink cartridge issue, so you need to assure that your printer has enough ink to print a text on the paper, if it doesn`t have enough ink, you may replace the ink cartridge as well. 4.
There are a few things that could be the cause of this problem, including: Empty ink or toner cartridges that need replacing. Ink or toner cartridges that have become dislodged from their proper place. The wrong paper size loaded in the input tray.
If one or more of the colours are missing from your printed document, the ink cartridges may not be installed correctly or nozzles in the print head may be clogged up. To solve this issue, do the following: Check the print quality and clean the print head. Install a new genuine Brother ink cartridge.
The printer may be new or in good working condition, but the printout is blank or missing ink. While an empty ink cartridge is a common reason for this problem, it`s not always the case. You may replace your printer`s ink cartridges with new ones and still encounter the same problem.
An error in the cartridges, the heads clogged by dry ink, a very low level in your consumables, a bad connection between the computer and the printer, a damaged cable, a jam in the print queue…, there are many reasons why your Brother printer may stop printing or print poorly even though you have not jumped the ink …
Make sure your printer is securely connected to your PC. The ink isn`t running out and the ink cartridges are not clogged. There`s enough paper in the paper tray. Restart your printer and give it a refersh, it could be just a glitch.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Check the printer driver settings. Check your application`s settings. Restart your Brother machine and the computer. Reinstall the printer driver.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :

Brother Compactronic I

HP Laserjet 4000 Printing Blank Pages
ANSWER : Would just like to say thank you to every one. I am a teacher and need my printer for a ridiculous amount of paper work that keeps me away from working with students. My printer was down for 5 school days. I finally got the new toner and it still didn’t print. After following your meticulous instructions I was able to get it working. Thank you Thank you Thank you to all people who contributed to this.

Read Full Q/A … :

Brother Compactronic I

printing blank pages
ANSWER : You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.

Read Full Q/A … :

Brother Compactronic I

HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.

Read Full Q/A … :

Brother Compactronic I

LIGHT LINES ON PRINTED COPIES
ANSWER : You give us so little info to go on. Vertical lines, horizontal lines? On copies, on prints, on both?

Read Full Q/A … :

Brother Compactronic I

HP Officejet 860 printer printing blank pages
ANSWER : First check the exact ink levels, replace if any one are low or empty.

Read Full Q/A … :

Brother Compactronic I

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :

Brother Compactronic I

mx892 prints only blank pages
ANSWER : Same problem, wondering what to do now ? What model did the print head go into that is the same ?

Read Full Q/A … :

Brother Compactronic I