Brother MFC 5860CN

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The Cartridge Error message appears if the toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly. Take out the toner cartridge, and put it back in the drum unit again. Reinstall the toner cartridge and drum unit assembly in the machine.
The message “Cannot Detect” will appear on the display of the Brother machine after installing an ink cartridge(s) that is (1) installed too quickly or (2) broken or damaged or (3) a non-Brother cartridge.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
The easiest remedy for this is to open the box and stand the cartridge upside down for a few minutes before using. Next, get a damp paper towel, fold it into quarters and the set cartridge print head down onto it, holding it there for three minutes. This will help to prime the print head and pull the ink out.
Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!
Hold each ink cartridge as it would be installed in the machine and locate the black Ink Sensor in the Ink Sensor Window at the top of the cartridge.
The chip is programmed to automatically reset when the cartridge reads empty in the printer, is removed, refilled with ink, and reinstalled. Upon reinserting the cartridge, the ink level will be reset to full.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Cartridge shelf life is the estimated length of time a cartridge will last in its sealed package. This time frame can vary depending on what sort of cartridge you are using. The shelf life for an original printer cartridge is 24 months and the shelf life for a compatible cartridge is 36 months.
The “Incompatible Cartridge” message may signal you that the cartridge was placed in the wrong slot. In case you get such an error, make sure the cartridge model numbers match your printer model and your country/region. After that, check if they are installed correctly in the corresponding slots.
If your printer is turned on, disconnect the power cord from the printer. Keep the power plug unplugged for 60 seconds, reconnect the power cord to the wall, and turn on the printer. If the error persists, remove the cartridge from the printer, clean the cartridge contacts with a cloth, and reinstall the cartridges.
Brother printer error

The Drum Error is another common error experienced by users of Brother printers. Both the error message “Drum Error” and “Clean Drum Unit” mean that the drum unit of your machine is dirty. The dirt may be caused by dust or by loose toner.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.

Read Full Q/A … :

Brother MFC 5860CN

MFC 8440 Brother 5 in 1
ANSWER : I have the same problem except both left and right hinges are broke. I’ve removed the and it does work but I’d still like to order the parts and replace them. Where would I find the parts for ordering.

Read Full Q/A … :

Brother MFC 5860CN

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother MFC 5860CN

brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago

Read Full Q/A … :

Brother MFC 5860CN

brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it

Read Full Q/A … :

Brother MFC 5860CN

Cartridge problem
ANSWER : In binary choices trading depends entirely on just how much you realize the methods and what broker you work! I for myself leafing through plenty of tactics but the very best tactics was included with the newspaper http://bestoptionstrategies.net encourage to use. Broblemy with brokers is not exceptional, and they need to get proven only. It absolutely was there that collected tested. Many thanks for your interest, I am hoping to help in your problem)))

Read Full Q/A … :

Brother MFC 5860CN

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother MFC 5860CN

Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?

Read Full Q/A … :

Brother MFC 5860CN