Brother WP 80
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
8F means either a paper tore inside while it was printing and jammed, or some other mechanical malfunction has occurred. Open your printer, take out the toner, and the back panel if there is one. Look inside to see if you see anything jammed or stuck.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
a misprint or misspelling in a text.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
2] Change Printer Status
- Open Windows Settings (Win + 1)
- Navigate to Devices > Printers and Scanners.
- Select the printer of which you want to change the status, and then click on Open queue.
- In the Print Queue window, click on Printer Offline. …
- Confirm, and the status of the printer will be set to online.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.
Read Full Q/A … :
Brother WP 80
Brother MFC 7220 "back cover open" error
ANSWER : Just googled this problem and delved into the innards of the machine. Lo and behold, there was a piece of paper stuck there and I have removed it (with difficulty). So it wasn’t “back cover” at all (which I kept on banging shut of course!). Misleading!
Read Full Q/A … :
Brother WP 80
Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ
Read Full Q/A … :
Brother WP 80
brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it
Read Full Q/A … :
Brother WP 80
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
Brother WP 80
brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago
Read Full Q/A … :
Brother WP 80
Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?
Read Full Q/A … :
Brother WP 80
Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.
Read Full Q/A … :
Brother WP 80