Brother HL 5100

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

This issue is usually resolved by cleaning and/or replacing the drum unit. We recommend using genuine Brother supplies to maximize print quality and performance.
There are four primary causes for horizontal banding on prints from inkjet printers, (1) nozzle clogs, (2) mis-aligned print heads, (3) low quality print settings (4) incorrect paper thickness settings.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
The band-shaped “stripes” are called “horizontal bands” or “banding.” Horizontal bands are caused by the subtle changes in the movement distance that occur when feeding the media depending on the media`s thickness. We recommend making corrections to match the media you are using.
Try removing all of the printer`s ink cartridges and replacing them. Print out a few test pages to see if the issue has been resolved. If you are still experiencing skipped lines, try to remove the ink cartridge and replace it with a brand-new cartridge, as this can sometimes alleviate concerns.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
A printer`s heads, nozzles, and other components can become dirty or clogged, which could show up as white lines running across your page. Your printer may have a head-cleaning feature available through your device software located on your computer or from the control panel on the printer itself.
This issue is usually caused by foreign material inside the machine (paper dust, glue from labels or envelopes, paper clips, staples, etc.) sticking to or damaging the surface of the drum. This is typically resolved by cleaning and/or replacing the drum unit.
You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.
Faulty and loose connections are the most common cause of horizontal lines on a TV. If you recently moved your TV, you might not have properly connected the cables. This is especially true if you`re using HDMI cables. Loose cables can easily slip out of their ports.
In coordinate geometry, horizontal lines are defined as lines parallel to the x-axis. If two points on a line have the same y-coordinate points then the line is said to be horizontal.
It`s simple really – the truth is that worn correctly horizontal stripes will even make you look thinner than vertical stripes.
Look at a wall, and look down to where that wall meets the floor. That intersection is a horizontal line. Other examples of horizontal lines we may see every day are the following: the line separating the sky from the land across a clear plain or the line separating the sky from the water at the beach.
If your printouts are faint or have gaps, try these solutions: Clean the print head. The ink cartridges may be old or low on ink, and you may need to replace them. Make sure the paper type setting matches the type of paper you loaded.
What Is Banding? Banding is a defect in inkjet printing that will appear as horizontal or vertical lines, streaks or bands in the printed output. Everyone will eventually experience some type of banding with their inkjet printer.
Streaks on your print jobs are a result of your copier glass being dirty. “Dirt” is created by fingerprints, dust, and other forms collected through usage. Often this will be detected by your device before streaks begin to appear, and a display will read that the glass needs to be cleaned.
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.
Black, cyan, magenta, or yellow vertical lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit. Follow the steps below to clean the corona wire and the drum roller. 1. Review your printed pages to identify the color causing the problem.
Separate drum units last quite a bit longer than a toner cartridge and typically should be replaced after the use of 3-4 toners. Your printer should inform you when it`s time to replace the drum, but you can usually tell your drum is on it`s last legs if you start to see black spots or lines across the page.
Smudges or dots on printed pages are usually caused by foreign material (paper dust, glue from labels or envelopes, toner residue, paper clips, staples, etc.) sticking to or damaging the surface of the drum unit. Cleaning the drum unit typically resolves this issue.
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess dirt, ink or toner powder, and as the paper is moved through the printer the `tracks` are being left on the page. This is normally the case when the tracks on the page are located at either end.
First and foremost, horizontal lines are perceived as thicker than vertical ones, an effect we have called the thickness illusion. This illusion, while a normal part of type designers` everyday practice, has until now, to our knowledge, never been experimentally established.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

BROTHER MFC 490CW/ MFC 210C
ANSWER : The industry says that at least once a month you should print something, even a test print page to avoid the ink drying up in the print heads. Most printers including Brother will turn themselves on occasionally to clean themselves. I do not recommend refilling your ink cartridges yourself. You can buy ‘non-OEM compatible refilled’ ink cartridges for you printers very cheaply but not all that make/sell these are of the same quality. So if this is of interest to you then you need to shop around until you find a good & reputable compatible non-OEM ink seller.

Read Full Q/A … :

Brother HL 5100

Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ

Read Full Q/A … :

Brother HL 5100

Brother MFC-5440CN 'Unable to Clean'
ANSWER : PRINTER MODEL MFC-J410W: PAPER JAM CLEARED, STILL WON’T PRINT–“UNABLE TO CLEAN 50” IS DISPLAYED. TRIED BOTH PURGE AND FLUSH–NEITHER WORKED. ANY OTHER IDEAS?

Read Full Q/A … :

Brother HL 5100

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother HL 5100

brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it

Read Full Q/A … :

Brother HL 5100

MFC 8440 Brother 5 in 1
ANSWER : I have the same problem except both left and right hinges are broke. I’ve removed the and it does work but I’d still like to order the parts and replace them. Where would I find the parts for ordering.

Read Full Q/A … :

Brother HL 5100

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother HL 5100

brother mfc 7420 toner life end message
ANSWER : Thanks a million. I tried all the other tricks and nothing worked. This worked perfectly on my MFC 8810. I wich I would have known this a long time ago

Read Full Q/A … :

Brother HL 5100