Brother DCP 1000

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

This issue is usually caused by foreign material inside the machine (paper dust, glue from labels or envelopes, paper clips, staples, etc.) sticking to or damaging the surface of the drum. This is typically resolved by cleaning and/or replacing the drum unit.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
Black, cyan, magenta, or yellow vertical lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit. Follow the steps below to clean the corona wire and the drum roller. 1. Review your printed pages to identify the color causing the problem.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Check the ink levels

Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.

The appearance of horizontal or vertical lines and wrinkles is due to various factors, among them genetics (loss of elasticity and firmness, slower cell renewal rate), hormone changes, sun exposure, smoking, pollution, stress and, of course, repeated facial expressions.
Regular washing and waxing helps to remove Black Streaks before they get good and stuck. A good regular wax job helps to prevent Black Streaks in the first place. A good layer of wax will help to minimize the way Black Streaks set into the surface. Waxing creates a physical barrier across the surface.
Streaking is usually caused by a worn out drum unit or spent toner cartridge. Drum units are a consumable and only need to be replaced after the use of 3 or 4 toners. Not all printers use a separate toner and drum unit.
HP has determined that 99% of all lines and streaks on copies made by feeding the original documents through the ADF are caused by debris on the ADF glass. Debris can include dust, paper or toner dust, residue from sticky note adhesive, correction fluid or tape, ink, fingerprints, and more.
Vertical lines go up and down and have a slope that is undefined. Graphs of horizontal lines are parallel to the x-axis. Graphs of vertical lines are parallel to the y-axis.
Vertical lines in prints are an early warning sign of a low ink cartridge, which may show up before the printer`s low ink alerts start. You can fix the problem by replacing the low cartridge. Gently shaking the drained cartridge a bit may help to get another few prints out of it without vertical lines.
What Is Banding? Banding is a defect in inkjet printing that will appear as horizontal or vertical lines, streaks or bands in the printed output. Everyone will eventually experience some type of banding with their inkjet printer.
If blank horizontal lines are printed on the labels or the print is not very clear, the print head or head roller may need to be cleaned. Follow the steps below to clean the print head and head roller: Clean the print head with the self-cleaning function.
Double printing can occur for several possible reasons including an improperly seated ink tank, a misaligned print head, and a dirty encoder stip. Select one of the links below to get detailed instructions to address the issue. Check that all ink tanks are seated properly. Refer to Replace an ink tank.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
Standard black uses only black ink (100% K), whereas rich black contains elements of other colors (Cyan, Magenta, Yellow).
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
noun A photographic print, resembling the blue-print, giving black lines on a white ground.
The equation of a vertical line is of the form x=c, where c is any real number. The vertical line will always intersect the x−axis at the point (c,0). The slope of a vertical line is undefined.
Horizontal lines are lines that run from left to right and are parallel to the x-axis. Vertical lines are lines that run up and down and are parallel to the y-axis.
Blackline is caused by Cherry leafroll virus and occurs on English walnut cultivars grown on Northern California black walnut or Paradox rootstock.
Treat the stain with a prewash stain remover spray or gel or a bit of heavy-duty liquid detergent. (Tide or Persil are rated as the best brands that contain enough enzymes to break apart stains.) Work the stain remover or detergent into the stained area by rubbing with your fingers or a soft-bristled brush.
Dots are typically caused by foreign material inside the machine (for example, paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
Vertical Streaks or Lines

Vertical white lines also can signal an obstruction that prevents the laser from imaging pages correctly. Resolving that problem can require cleaning elements of the laser assembly or replacing it altogether.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.

Read Full Q/A … :

Brother DCP 1000

Brother MFC-L2740DW maintenance mode
ANSWER : Hi,

Read Full Q/A … :

Brother DCP 1000

Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))

Read Full Q/A … :

Brother DCP 1000

Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!

Read Full Q/A … :

Brother DCP 1000

Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.

Read Full Q/A … :

Brother DCP 1000

black smudge lines
ANSWER : Not knowing if the drum is OEM or remanufactured or if it is way expired, only thing I can suggest is looking at it. Take the toner out and turn it manually with your thumbs on the gear. The drum should be clean all the way around.

Read Full Q/A … :

Brother DCP 1000

Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W

Read Full Q/A … :

Brother DCP 1000

Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009

Read Full Q/A … :

Brother DCP 1000