Brother Compactronic I
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The fuser unit is a consumable item that requires periodic replacement. After you have printed approximately 100,000 pages (letter or A4 size paper), the message `Replace Fuser` will appear on the LCD display. NOTE: The actual number of printed pages will vary depending on the print jobs and paper you use.
The message `Fuser Error` or `Self-Diagnostic` indicates the fuser unit is too hot, too cold, or is not heating up fast enough. It is a mechanical malfunction of the Brother machine and the machine will need to be reset.
A fuser unit is a pair of heated rollers within the printer that fuses the toner onto the paper being printed on. Toner particles are pulled to the paper to create the desired text and images as the paper passes the imaging drum.
When the fuser unit is nearing the end of its life, problems of deteriorated printing quality, such as residual images appearing on non-printed areas or toner not fixing onto paper completely or of paper coming out wrinkled, occur. In this case, it is recommended that you replace the fuser unit with a new one.
Fuser Units
The coating wears off and causes the toner to not fuse properly. There are replacement rollers and sleeves on the market that you can replace and turn a non-functional fuser into a good working one. Rebuilding fuser assemblies is not a new thing.
Most laser printers will inform you when the fuser unit needs to be replaced. An easy way to identify when a fuser unit needs to be replaced is when smudging or smearing on your printout begins. Smudging and smearing occur when the fuser stops heating the toner particles enough to melt them onto the page fully.
The fuser unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 100,000 pages and should be replaced immediately. The printer will not operate until the fuser unit is replaced.
The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.
The fuser unit is a heated roller that melts the toner particles onto the page as it passes through. This seals the toner to the page so it`s no longer in powder form and makes sure that the toner doesn`t smudge of fall off the paper when it comes out of the printer.
The fuser is a part of laser printers that bonds the toner and paper together using heat and pressure. Fusers need to be replaced every 75,000 – 300,000 pages depending on the printer model.
The fuser unit or fuser assembly, is a critical component of your laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without out it, your printer cannot operate.
If you are experiencing a “50.7” fuser error, first turn the printer off and back on. Sometimes the error will temporarily go away with a reboot so you can print a few more pages, but usually the error reappears.
– Preprinted paper must use ink that can withstand the temperature of the machine`s fusing process 392 degrees Fahrenheit (200 degrees Centigrade).
The Fuser operates in the temperature range of 175 – 215o C (347-419o F).
The biggest difference lies in the name, as they tend to include all of the same parts. A maintenance kit should include a new fuser assembly, and a fuser kit should include all the necessary maintenance parts.
Fuser kits replace the heating element in Laser printers that fuses toner onto paper. These elements wear out from normal use, and many printers need a new fuser every 60,000 pages.
Push up on the release buttons on both sides of the fuser to release the springs, and then pull the fuser out of the printer. Place the old fuser aside for recycling. Remove the new fuser from its box. Remove the protective packaging.
The following are the top reasons why paper jams occur:
unsupported paper/media is used. incorrect paper settings in the tray and/or the print driver. paper loaded incorrectly and/or paper edge guides not adjusted properly in the tray. humidity and/or paper condition and storage.
Removing and re-installing or replacing the Fuser while the machine is powered on may cause damage to the machine and cause it to become inoperable. WARNING: The Fuser and surrounding area may become very hot during operation.
The toner is rolled onto the substrate as it passes the drum; toner particles with negative charge get attracted to the paper with the positive charge and thus produce the desired image. The fuser unit or hot roller is used to melt the toner powder, which is essentially plastic, onto the paper.
The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
Rollers with silicone-rubber coating for the use in industrial high-speed printing-applications.
Printing made easy with an HP Fuser Kit
It lets you print up to 150,000 pages of dynamic quality before you need to replace it.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Brother MFC 9130cw Fuser and PF reset
ANSWER : I have a MFC-9325cw. I had the fuser and PF kit replaced but the person who replaced it did not reset the life counters for these parts. Brother was NO HELP whatsoever! I found this blog: http://yannickdekoeijer.blogspot.com/2014/11/how-to-reset-consumables-like-toners.html and also found the answer to my problem! Press #3 and #9 at the same time. Use the arrows to scroll through the menu to find the correct part and click OK, click #1 to reset.
Read Full Q/A … :
Brother Compactronic I
4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.
Read Full Q/A … :
Brother Compactronic I
Waste Toner Cartridge is empty but printer is still telling me to replace it
ANSWER : All of the ones I’ve seen are optical. Light shines through a transparent section of the waste box onto a photocell. If toner builds up past that area, it gives a warning to replace it. Possibly toner dust has gotten on the photocell.
Read Full Q/A … :
Brother Compactronic I
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
Brother Compactronic I
Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!
Read Full Q/A … :
Brother Compactronic I
Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.
Read Full Q/A … :
Brother Compactronic I
Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W
Read Full Q/A … :
Brother Compactronic I
Please help! Replace toner message keeps coming up! Brother DCM-1510
ANSWER : It’s a laser printer, there is no ink. You are going about it the wrong way. Watch this video. You can just skip the first part and go to 1:30 into the video. http://www.dailymotion.com/video/x1yakq1_how-to-refill-and-reset-brother-hl-1110-hl-1112-hl-1112a-dcp-1510-dcp-1512e-mfc-1810_tech
Read Full Q/A … :
Brother Compactronic I