How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Try disconnecting and reconnecting the USB cable on from both ends. Disconnect both your Brother machine and the computer and reconnect. NOTE: When the USB connection confirmation screen appears, click Allow or Yes. (If you are using a USB hub, remove it and connect your Brother machine directly to the computer.)
The network connection between your computer and the wireless router may be unavailable or set up incorrectly. If you replaced your wireless router or access point, or changed its settings, reconnect your Brother machine to the new wireless router or access point. >
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
– Disconnect the Brother machine from the power outlet. Wait about 15 seconds, and then plug it back in. – Make sure your computer is on the same network as your machine. – Wireless Network Users: Reconnect your machine to your wireless network if you haven`t already done so.
– Try a different Ethernet cable. – Reboot the power to your router, access point, or switch. – Make sure that your router is configured to automatically assign an IP Address to connected devices.
Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.
Click Start, (All apps,) Windows System then select Command Prompt. Enter ipconfig. (C:\>ipconfig) and press Enter. You should receive information about your computer`s network connection.
Your Brother Printer could be listed as “Offline” because it is not turned on, it has errors such as empty toner, it is not set as the default printer or its USB cord or its Network have a connection problem.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!
Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.
4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.
Brother MFC-L2740DW maintenance mode
ANSWER : Hi,
Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W
Brother HL-2270dw Printer
ANSWER : maybe you can download here Brother HL-2270dw Driver Download