Brother DCP-J125 Paper Jammed Problem

The message Paper Jam may appear on the display if the Brother machine is not feeding paper correctly, paper scraps have become stuck in the print head path, the paper is not loaded properly in the paper tray, the jam clear cover located in the back of the machine, is not installed properly or the PE Actuator is …

your pickup roller is dirty and the printer can`t grab a piece of paper. it will say paper jam when it does this. get a drop of dishsoap and clean the pickup roller of your printer with this. scrape at it with your fingernail to get the roller clean and wipe it off with a damp washcloth.

Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer. False paper jams can also occur.

Improperly Loading Paper into the Device

Loading paper that is stuck together, frayed, curled or bent can cause a jam. Overloading the paper tray, loading different thicknesses of paper in the tray or using paper that isn`t appropriate for your particular printer can all result in a jammed printer.

Did you know most copier paper jams are caused by the paper itself? Misaligned paper. When a stack of paper isn`t aligned properly in the machine, it often causes a paper jam issue. When adding a ream of paper, always fan the paper, load carefully and avoid overstuffing the tray.

A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Common causes of paper jams include: Damaged rollers. Inserting paper that is incompatible with the printer. Loading the paper incorrectly.

Slide the paper all the way into the printer. The leading edge of the paper will stop at the Paper Drive Roller. Locate the Paper Sensor/OOPs sensor on the right side of the paper path. It can be seen from the top of the printer with the Top Cover open and has red, black, and blue wires attached to it.

Clear the clipboard. If you are seeing any clipboard errors, clearing the clipboard history will often resolve those and get copy and paste working again. Use the Keyboard troubleshooter tool. You can access this is the Windows Settings app, by selecting System, Troubleshoot, and then Other Troubleshooters.

You`ll know the drum is dirty if you notice that the print quality has become blurry and features blank spots or oddly-colored spots despite having full toner cartridges. Horizontal lines across the printout when the paper passes over a dirty area are another sign that it`s time for some maintenance.

The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.

Dirty printer rollers. If your paper jams are happening randomly and you can`t identify the cause, it could be that your printer rollers are dirty. Over time, dust and debris can build up on the rollers and cause the rollers to grab onto paper unevenly, which can lead to paper jams.

Dirty printer rollers. If your paper jams are happening randomly and you can`t identify the cause, it could be that your printer rollers are dirty. Over time, dust and debris can build up on the rollers and cause the rollers to grab onto paper unevenly, which can lead to paper jams.

First check that the cartridges are correctly inserted and then examine the cartridge chip. If it is dirty, clean it with a cotton swab and a little alcohol, if it is incorrectly set, press it to reset it. Turn off and restart the printer now.