Brother DCP 115C

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The error message Cover is open indicates that the top cover, the fuser cover or the ADF (automatic document feeder) cover of your Brother machine is not completely closed.
The network connection between your computer and the wireless router may be unavailable or set up incorrectly. If you replaced your wireless router or access point, or changed its settings, reconnect your Brother machine to the new wireless router or access point. >
You should not unplug the machine when it is not in use. When the machine is off, it will still periodically clean its print head to maintain print quality. To prolong the length of the print head, provide better ink efficiency, and maintain print quality, you should keep your machine plugged in at all times.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Click Start > Control Panel > Control Panel Home (on the left) > System & Maintenance (on the top). Scroll down and click Administrative Tools. Double-click on Services > scroll down to Print Spooler > right-click Print Spooler > restart.
1: Check Printer Power, Cables, and Paper

Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.

Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
The average lifespan of a printer is around 3-5 years. With proper upkeep and maintenance, some printers can last longer, but eventually your machine will need an upgrade.
When leaving printers dormant for months with no printer maintenance or cleaning, dust can gather on print heads or nozzles, or cartridges can become clogged or dry, reducing or stopping ink flow.
You may face the “printer not activated error code –20/30” for different reasons. For instance, the outdated Windows OS, incorrectly working printer drivers, or not having the fill permissions of your account may lead to this issue. Besides, this error may also be caused when your printer device is not set as default.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
If the Error LED is flashing, use the steps below to check the following: paper jam in the drum area, fuser cover may be open, paper jam in rear, or memory full or print overrun.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Brother MFC 7220 "back cover open" error
ANSWER : Just googled this problem and delved into the innards of the machine. Lo and behold, there was a piece of paper stuck there and I have removed it (with difficulty). So it wasn’t “back cover” at all (which I kept on banging shut of course!). Misleading!

Read Full Q/A … :

Brother DCP 115C

Brother HL-1650 Service Call Error E50
ANSWER : Thanks to vikas on Sep 15, 2005 at 9:09am

Read Full Q/A … :

Brother DCP 115C

Brother Intellifax 4750e 77 error
ANSWER : I just received a used fax machine from a school district that recently purchased a new one. Everything is fine except the indicator light is not lit. It runs perfectly, I just can’t read anything on the screen. Also, is there any way I can get a manual other than printing it. There are 156 pages and I will run out of toner or paper, or both. Thank you.

Read Full Q/A … :

Brother DCP 115C

Brother MFC-9840CDW Print Unable 32 Error
ANSWER : That is caused by a sticking solenoid. It’s not that hard to fix, I’ve done a bunch of them. Here is a video that shows how. https://www.youtube.com/watch?v=6Bob34TLrPQ

Read Full Q/A … :

Brother DCP 115C

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Brother DCP 115C

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :

Brother DCP 115C

Please help! Replace toner message keeps coming up! Brother DCM-1510
ANSWER : It’s a laser printer, there is no ink. You are going about it the wrong way. Watch this video. You can just skip the first part and go to 1:30 into the video. http://www.dailymotion.com/video/x1yakq1_how-to-refill-and-reset-brother-hl-1110-hl-1112-hl-1112a-dcp-1510-dcp-1512e-mfc-1810_tech

Read Full Q/A … :

Brother DCP 115C

Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W

Read Full Q/A … :

Brother DCP 115C