Brother DCP 1400
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Press [Settings]>[All Settings]>[Print Reports]>[Network Configuration]. Press [Yes]. The machine prints the Network Configuration Report.
Run System Preferences, choose Printers & Scanners, and then choose the machine. Click Options Supplies…. Click the Utility tab, and then click Open Printer Utility. The Status Monitor will start up.
“Data Remaining” will appear on your machine`s display if incomplete or incorrect data is sent from your computer to your machine. 1. Press and hold Stop/Exit for 5 seconds. This will cancel the print job from the machine`s memory.
The printed status means that your return has been “printed” or downloaded and is ready to be mailed in.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Switch off and restart the printer.
Sometimes this is all that`s needed to solve this. If there are any jobs in the queue that can`t be shifted, a restart should flush these out. Now try and print. More often than not, this should resolve the problem.
To track printer usage, perform the following steps: Click Start → Administrative Tools → Active Directory Users and Computers. Click the Active Directory container of the OU or Domain that you want to manage. Right-click that container, and then click Properties.
The printer`s Status Sheet contains information about the printer and its current settings such as the IP address and how the printer connects to your Network. This information is both important and useful when configuring a new device or troubleshooting a device currently in use.
A printer may seem idle when it should not be for one of the following reasons: The current print request is being filtered. The printer has a fault. Networking problems may be interrupting the printing process.
The icon for the Printer Status Window is displayed in the Windows taskbar. Click the icon, then click the printer name to run it. The Printer Status Window appears as follows during printing or when an error occurs. The status of the Printer Status Window varies depending on the printer operation as follows.
Whenever a paper tray becomes empty or paper is jammed, an e-mail alert is issued to the registered addresses to notify the printer status.
An offline printer is one that cannot communicate with the device sending the print job. Unfortunately, a printer that is offline cannot receive new print jobs and process them, so it`s wise to pause all print jobs until you resolve the issue.
Click on the Brother Printer Driver and click Open print queue. Cancel the print jobs. To cancel all documents click Printer => Cancel All Documents (or Purge Print Documents). To cancel only chosen print jobs, click on the specific job to highlight it.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
brother mfc 9440 cn
ANSWER : I was able to fix the same problem with scotch tape on the selinord with removing it
Read Full Q/A … :
Brother DCP 1400
Changing Language of Printer Brother MFC-J5910DW
ANSWER : I have a 2720DW from the netherlands it is a french model an it has the code 0009
Read Full Q/A … :
Brother DCP 1400
Brother J315W – paper misfeed
ANSWER : I have the same problem: whether printing or copying, the paper feeds almost up to the print head and then stops with a paper jam error. Can’t find any bits of paper stuck anywhere. Sure would appreciate some help. DCP-J315W
Read Full Q/A … :
Brother DCP 1400
Brother MFC-J6510DW extra paper tray.
ANSWER : There clearly was a similar problem couldn’t enter in to a ditch of benefit drawing up a strategy. A pal gave this http://put-call-options.com site to select an appropriate technique and I have chosen for themselves the optimum and successful naybolee. I hope I served you with your problem. Thanks for attention)))
Read Full Q/A … :
Brother DCP 1400
4F displayed on Brother 990CW printer?
ANSWER : That’s a printhead error.
Read Full Q/A … :
Brother DCP 1400
Brother MFC-L2740DW maintenance mode
ANSWER : Hi,
Read Full Q/A … :
Brother DCP 1400
Brother MFC 8220
ANSWER : This problem is normally caused by the fuser. There’s a brown driver gear who frequently broke and you’ll be obliged to replce it to take care of the problem.
Read Full Q/A … :
Brother DCP 1400
Brother HL-2170W — 2nd sheet printing causes jam
ANSWER : I tried Angry Larry’s link to Photobucket but there’s an error message. I tried rocklobster’s link to Imageshack, but it’s for a different printer. Can someone please send me the photos to fix this issue with my Brother HL-2170W? My email is [email protected] Very much appreciated!
Read Full Q/A … :
Brother DCP 1400