Epson Artisan 50

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Once a cartridge has been used until it is empty the chip records that the cartridge has no remaining ink or toner and so when it`s refilled, the chip needs to be reset. If this isn`t done, then the printer will fail to recognise the cartridge.
The product prints a nozzle check pattern. Check the printed pattern to see if there are gaps in the lines. If there are no gaps, the print head is clean and you can continue printing. If there are gaps or the pattern is faint, clean the print head.
Remove the cartridges from your printer – switch your printer off. Using a piece of damp kitchen roll, gently wipe the copper plate on the cartridge. Allow the chips to air dry. Once the chips are completely dry, re-install the cartridges into your printer and switch the printer back on.
Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
Your printer displays the “Missing or Failed Printhead” error to signal a malfunctioning printhead. The issue could be due to clogged ink nozzles, dirty ink cartridges, internal paper jams, and more. HP printers may also display this error if the printhead pulls air from ink cartridges.
There isn`t much that can be done in the way of repairing a printhead, only replacing parts. By the time a printer technician assesses your printer, gets the part you need, and replaces it, you could have ordered a new printhead from allprintheads.com and replaced it yourself for much less.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Remove all of the new cartridges you had installed and re-install the old (empty) cartridges that worked. Restart the printer, this should remove the not recognised error (and tell you some are empty).
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
Chances are you suspect a faulty ink cartridge due to your print quality declining. Streaks, smears and stripes on your printout are all signs of a bad cartridge, as is a lack of a particular color or a color appearing very faint. Sometimes the printer refuses to print if a cartridge is faulty.
Ink streaks, leaks or toner dust are telltale signs that a cartridge may be a counterfeit product.
Press the right or left arrow button to highlight the ink tank you refilled and press the OK button to select it. Repeat for each ink tank color you refilled. Press the start button to reset the ink levels, then press the OK button when the reset is complete.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
The most common reason a refilled ink cartridge does not work is that you didn`t reinstall the cartridge properly. Check the cartridge and make sure it is not dislodged or misaligned. If there is no visible sign of misinstallation, remove the cartridge and reinstall it.
The reason may be quite simple – your cartridge is dry or clogged. Still, adding fresh ink may not resolve the situation. Try to wipe the cartridge with a lint-free cloth dampened with isopropyl alcohol. Please avoid touching the metal parts of these cartridges and the chip not to damage their electrical contacts.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Artisan 50

Epson, sudden cannot recognise cartridges error
ANSWER : Hi, I have exactly the same problem than you, I’ve been trying to solve it since 6 months. I have an Artisan PX730 WD, and the genuine cartridge can’t be recognized all together. And status monitor indicates same thing than you.

Read Full Q/A … :

Epson Artisan 50

Tell me the best aleternative option of Epson Expression XP-400 ink cartridges ?
ANSWER : I’ve had good success with www.ccs-digital.com products

Read Full Q/A … :

Epson Artisan 50

Epson ink cartridge leaking?
ANSWER : Posting this cause it worked for me. I have an Artisan 837 that was leaving pools of blue on the page. I tried Epson’s recommendation of cleaning the print path by pressing the copy button on the control panel (with nothing on the flatbed). Printed 5 pages and the last 2 were clean. Did a test print and the problem was back. Repeated a few times with the problem reocccuring. Switched out the cartridge. no better and now the printer doesn’t recognize its own brand cartridge. Yet, it accepts the 3rd party one.

Read Full Q/A … :

Epson Artisan 50

Epson R300 ink cartridge cannot be recognized HELP
ANSWER : Hi Donna

Read Full Q/A … :

Epson Artisan 50

Epson RX620 Ink cartridges cannot be recognized
ANSWER : Hd snapping the ink cartridges in better, as per other people’s instructions, and no go. I got all frustrated, banged the printer’s side, and reposed in and out the dang cartridges and nada. Got all pissy and told the printer to Proceed with low Levels. I clicked Print and then when the epson printer icon came on, I clicked on settings and Ink supply levels. In here, it said my YELLOW ink was low, and yet on my epson printer screen, it kept saying my black levels were low. wtf. i had an extra yellow as I hadn’t changed it out with the cyan and blue and yep, all working now. geez. try your computer instead of the printer!!

Read Full Q/A … :

Epson Artisan 50

Epson XP600 Paper Jam
ANSWER : hi Russ .did u find solution for ur problem?? i have the same problem ,how did u fix ur printer ..will be glad if u write me on email [email protected]

Read Full Q/A … :

Epson Artisan 50

Epson R3000 Inkjets Clogged
ANSWER : If you haven’t yet destroyed your printer or turned it into a paper weight, check this out:

Read Full Q/A … :

Epson Artisan 50