Konica-Minolta Bizhub C220
Printer is printing pages with strips on full widht of page in direction like paper is moving. Tested also with blank pages and problems still occurs.
Experienced technical support provide their insights in answering this question :
That would be a bad wiper blade in the drum unit. Either the black or color drums. Whatever color or black the stripes are.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Right-click the icon of this machine, and click [Properties] (or [Printer Properties]). In the [General] tab, click [Print Test Page]. If test printing has succeeded, click [OK]. If test printing has failed, click [Troubleshoot] to find out how to solve the problem.
Press the [JOB LIST] tab to display the [Hold Job] screen. Select a job that you want to print its test, then press [Job Ticket].
Turn Power Off inside front door Press and Hold Down Utility/Counter Button & Keep Held Down while turning power back on until a black dot appears in the top right of the control panel display then release. An Arrow and OK should appear. Switch off and on again and error should clear.
On the Start menu, click on Settings. Select Devices > Printers & Scanners. Select your printer, and then click on the Manage button. On the left hand side, click Print Test Page.
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
Turn the printer off. Disconnect the power cable from the printer for 30 seconds and then reconnect. Turn the printer on while you press and hold the Resume button for 10-20 seconds.
The trouble code c-2152 means image Transfer belt unit retraction failure or Sensor plate.
Test pages often include text, graphics, and images that, when printed, aim to maintain the health of your printer (and cartridges) while highlighting any issues that your printer may be having.
The shortcut key to print documents is Ctrl + P.
Right-click your printer and select Properties. Then in the General tab click on the Print Test Page button. If you are unable to print a test page after following the previous steps, you may want to restart your computer. Restarting fixes many hardware problems.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Blank page with strips
ANSWER : That would be a bad wiper blade in the drum unit. Either the black or color drums. Whatever color or black the stripes are.
Read Full Q/A … :
Konica-Minolta Bizhub C220
HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.
Read Full Q/A … :
Konica-Minolta Bizhub C220
mx892 prints only blank pages
ANSWER : Same problem, wondering what to do now ? What model did the print head go into that is the same ?
Read Full Q/A … :
Konica-Minolta Bizhub C220
HP Officejet 860 printer printing blank pages
ANSWER : First check the exact ink levels, replace if any one are low or empty.
Read Full Q/A … :
Konica-Minolta Bizhub C220
HP Laserjet 4000 Printing Blank Pages
ANSWER : Would just like to say thank you to every one. I am a teacher and need my printer for a ridiculous amount of paper work that keeps me away from working with students. My printer was down for 5 school days. I finally got the new toner and it still didn’t print. After following your meticulous instructions I was able to get it working. Thank you Thank you Thank you to all people who contributed to this.
Read Full Q/A … :
Konica-Minolta Bizhub C220
printing blank pages
ANSWER : You can’t let an inkjet printer sit that long. Try flushing the heads. Take out all the ink tanks and to the right of the assy. you will see a plastic lever. Lift it and it will release the heads. Take it to the sink and using hot running water, flush it from top and bottom several times. Then blot it dry and reinstall.
Read Full Q/A … :
Konica-Minolta Bizhub C220
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
Konica-Minolta Bizhub C220
printing blank pages
ANSWER : I assist the binary alternatives for really a while, and only half a year ago I identified to enhance the strategy for a greater, she called for support Bing and he offered me this web site http://option-strategies.org Now I focus on the suitable approach for themselves, and details gone up. I think every one confronted using this problem. I think my estimation is going to be advantageous to you.
Read Full Q/A … :
Konica-Minolta Bizhub C220