HP LaserJet 6P
any idea how to fix this problem
Experienced technical support provide their insights in answering this question :
Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
This issue is usually caused by foreign material inside the machine (paper dust, glue from labels or envelopes, paper clips, staples, etc.) sticking to or damaging the surface of the drum. This is typically resolved by cleaning and/or replacing the drum unit.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
Removing the toner and lightly cleaning the head, and any residue on the printer will also help reduce any smudges and black lines. You will also want to clean all trays to avoid any dried ink from attaching to the paper.
This happens when the rollers or the transfer belt inside the printer get dirty or covered in excess dirt, ink or toner powder, and as the paper is moved through the printer the `tracks` are being left on the page. This is normally the case when the tracks on the page are located at either end.
If you notice white or dark lines in your prints (also called banding), try these solutions before you reprint: Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. Make sure the paper type setting matches the type of paper you loaded.
Dots are typically caused by foreign material inside the machine (for example, paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
Streaks and unwanted lines could mean that the printer heads are out of alignment. There`s an alignment tool in the printer`s control panel. If that`s not the issue then the printer is dirty. Printer ink stripes may appear along the edges of the paper, which means there`s ink on the rollers and other parts.
Algae commonly cause streaking and staining on roofs. The dark color that appears as a black stain is caused by a specific type of algae called gloeocapsa magma. This growth is a type of bacteria that forms when algae spores group together.
Dots are typically caused by foreign material inside the machine (for example, paper dust, glue from labels or envelopes, paper clips, staples) sticking to or damaging the surface of the drum. Toner builds up on or sticks to these areas on the drum and creates black dots on the printed pages.
Faint, streaky or spotty prints are all common signs of a clog but a simple cleaning can usually get your HP ink cartridges working again. Printheads clog due to infrequent cartridge use. If you regularly go a few weeks without printing, your cartridges will eventually dry out and need to be replaced.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Black line printing in the middle of the page from top to bottom
ANSWER : Take out the toner cartridge and look at the drum. If you see the line, replace the cartridge. If you don’t, then you need to replace the fuser assembly.
Read Full Q/A … :
HP LaserJet 6P
Black line on printed copy
ANSWER : Have absolutely no idea what kind of machine you have so here’s the generic answer. Big copy glass, little copy glass to the left of it. Take window cleaner, put it on paper towel, clean little glass.
Read Full Q/A … :
HP LaserJet 6P
Black line down right side of page
ANSWER : The black film is the upper fuser roller. You need to replace the fuser unit. Not hard to do. Remove the back “door” and flip down the two blue levers. The fuser will slide straight out.
Read Full Q/A … :
HP LaserJet 6P
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
HP LaserJet 6P
changing from printing in photo black to black ink
ANSWER : You can change the black ink cartridge and choose either Matte Black or Photo Black.You will need to use the Black Ink Conversion Kit that came with your printer. The kit includes three conversion cartridges (yellow, magenta, and cyan), which are used to reduce the amount of ink consumed in the conversion. dissertation writing service
Read Full Q/A … :
HP LaserJet 6P
Light streaks on the left side of printed image top to bottom
ANSWER : Most likely cause would be the imaging unit. http://www.precisionroller.com/drum-units-for-konica-minolta-magicolor-1600w/products.html
Read Full Q/A … :
HP LaserJet 6P
Canon i560 Will not print black
ANSWER : Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
Read Full Q/A … :
HP LaserJet 6P
C1660w black printing light
ANSWER : Have someone fixed this? I have the same problem. Please help.
Read Full Q/A … :
HP LaserJet 6P