HP Photosmart 5520
Suddenly my black printer cartridge has stopped printing.
Experienced technical support provide their insights in answering this question :
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If your HP printer not printing black ink correctly, here`s what you should do. Using non-genuine ink cartridges. Printheads that have become clogged. Ink cartridges that are defective or empty.
Check if the vents of the cartridges are clogged. You can fix this by gently using a pin to clean up the clog on the vent. 5. Try using a different ink cartridge to determine if your printer is able to recognize cartridges.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Check the vents on the top of the ink cartridges. If they are clogged or obstructed, the ink cartridges might not work properly, which can affect print quality. note: To avoid print quality issues and dried out ink cartridges, do not leave any ink cartridges outside the printer for longer than 30 minutes.
Reasons why your HP printer has ink but won`t print
This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
This error message is usually the result of a cartridge that is not firmly seated in its designated slot. To troubleshoot the problem, begin by completely removing the cartridge from its port. Reinstall the cartridge by positioning it so that it snaps into place and is securely fastened in its slot.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
Can you print with one or two empty ink cartridges? The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long.
Ink cartridges can dry out over time. If they are sitting in your machine for an extended period, they will eventually dry up and become unusable. The simplest way to combat this problem is by printing more frequently or running regular cleans and ink tests to ensure the nozzles remain clean.
Whether you use an HP printer or any other, you can make it possible to print in black while your printer screen is showing the color cartridge empty notification. All you need to do is reset your printer first and then, make certain print settings i.e open the option of “Print in Grayscale”.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer. If a Single-cartridge mode message displays, select OK. If you are using the black cartridge, prints are in black and white (grayscale).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
black cartridge not printing
changing from printing in photo black to black ink
You can change the black ink cartridge and choose either Matte Black or Photo Black.You will need to use the Black Ink Conversion Kit that came with your printer. The kit includes three conversion cartridges (yellow, magenta, and cyan), which are used to reduce the amount of ink consumed in the conversion. dissertation writing service
I replaced the black toner cartridge and now the printer shakes though it is fine when I set it for grayscale only prints
You need to unlock the carousel. Once you unlock it and remove the toners, ignore all the rest of the crap. Pick any color and align the cartridge slot on the left side like you would have it to remove the cartridge. Then pull out on the gear towards you on the right and drop it so the right slot is lined up as well. You can get it aligned pretty close by just eyeballing it visually. I’ve never seen the left side go out of alignment, just the right, so this method has worked for me everytime.
when printing front and back, the front will print well but the back will fade
It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Canon i560 Will not print black
Dang, it worked for me then wentback to normal (not working) after the test page. Oh well not bad for a 10 year old bubble jet.
C1660w black printing light
Have someone fixed this? I have the same problem. Please help.
PRINTER FAILS TO PRINT BLACK TEXTS/IMAGES
Chatter from toner cartridges before printing
The video may have the answer you want