Epson Stylus Photo 1280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors.
The Epson Stylus® Photo 1280 inkjet printer is the ideal large-format choice. It creates beautiful 8″ x 10″ prints in as fast as 1 minute 50 seconds¹ and inspiring 13″ x 44″ panoramas faster than ever.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
If you`ve had your printer for a while and your print is still not bright or vibrant, it`s probably your time, temperature, or pressure. You need all three in order to sublimate on something – you need the correct time, the correct temperature, and the correct pressure.
For Windows Users

Click the Screen Calibration Utility icon button. The Screen Calibration dialog box appears. Move the slider to the right or left until the two shades of the gray horizontal stripes match. Click OK when you have finished calibrating your scanner and monitor.

First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Make sure you selected the correct paper size and layout settings in your printing program and printer software. Make sure you selected the correct paper size on the control panel. Make sure your paper is positioned correctly for feeding into the printer. Slide the edge guides against the edges of the paper.
Click the Layout icon button. Select the Fit to Page check box. Select the paper size loaded in your printer from the Output Paper Size list.
The reason has to do with light vs. ink. Computers use red, green and blue (RGB) light to display colors, while print uses cyan, magenta, yellow and black (CMYK) ink. Colors as emitted by light can never be perfectly reproduced in ink, and vice versa—but your marketing agency can get it as close as possible!
Use CMYK for any project design that will be physically printed, not viewed on a screen. If you need to recreate your design with ink or paint, the CMYK color mode will give you more accurate results.
If the quality of your printouts remains poor even after repeatedly cleaning and aligning the print head, one or some of the ink cartridges may be old or damaged and should be replaced. To replace an ink cartridge before the Status Monitor notifies you that the cartridge is empty, see Replacing an Ink Cartridge.
The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Color Stylus 740
ANSWER : Moe

Read Full Q/A … :

Epson Stylus Photo 1280

EPSON How to print in black when color ink is out?
ANSWER : Yup. Epson can suck my fat hairy toes. Spent a S#!$ load on a new black ink cartridge for it to still not work.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Color 3000
ANSWER : Hi i’ve a problem with my espon 3000… i’ve didn’t use it for a while (maybe 3 years) and now i bought new compatible cartridge but the printer doesn’t print anything… maybe the printhead is blocked or anything else.. can you help me?

Read Full Q/A … :

Epson Stylus Photo 1280

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Workforce 600 won't clear paper jam message
ANSWER : In my case, I have a WorkForce 7620 having this problem too, and there is white post on a sliding plastic bar which is the reason of my sorrow. I cannot move it, and it is getting me so desperate, because it makes the print head get stuck. I try to push it down to get the print head to the right position. Then, when I turn on the printer, the print head cannot move. The bar post don’t go down to free the print head and all I got all the time is an error code 0x69 on the screen. I see no paper jam there. Any suggestion, please?

Read Full Q/A … :

Epson Stylus Photo 1280

Epson ink cartridge leaking?
ANSWER : Posting this cause it worked for me. I have an Artisan 837 that was leaving pools of blue on the page. I tried Epson’s recommendation of cleaning the print path by pressing the copy button on the control panel (with nothing on the flatbed). Printed 5 pages and the last 2 were clean. Did a test print and the problem was back. Repeated a few times with the problem reocccuring. Switched out the cartridge. no better and now the printer doesn’t recognize its own brand cartridge. Yet, it accepts the 3rd party one.

Read Full Q/A … :

Epson Stylus Photo 1280

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

Epson Stylus Photo 1280